A NOVEL INVENTION

25%

Seventh-day Adventist Publishing Association · Battle Creek, Mich. · Feb 19, 1884

FromReview and Herald, Vol. 61, No. 8.

Read the full edition

A NOVEL INVENTION.

THIS is an astonishing age, but who would have dreamed that among its other wonders would be a barrel without staves or hoops! Nevertheless, here it is, the work of Mr. Mark L. Deering, mechanical engineer, Cleveland, Ohio. The material he uses to make this seamless barrel is wood pulp, an article for making paper. A certain amount of this pulp is placed in an iron cylinder, the inside of which is shaped exactly like a barrel. This cylinder is made to revolve by an ingenious arrangement both ways; that is, the ordinary way that a barrel would revolve, and revolve at the same time head over head, at right angles, at about one hundred revolutions a minute. The centrifugal force of this double revolution throws the pulp equally in every direction, spreading it, so to speak, equally all over the inside surface of the cylinder.
After being revolved in this manner three or four minutes, air is then pumped through the bung (which is made tight around the pipe conveying the air) till a pressure of one hundred pounds to the inch is obtained. This is done without a cessation of the movement of the cylinder. The pressure of this air squeezes all the water in the pulp through the brass lining of the cylinder, which is perforated with minute holes, and is carried away in the grooves of the iron cylinder. After being revolved for three minutes under this pressure, the two halves of the cylinder are opened, and a perfectly shaped barrel is taken out all complete, with heads in, which is laid aside for twenty-four hours for the purpose of being seasoned; it is then placed in a drying room, heated by steam to one hundred and sixty degrees of heat, and kept there for about three days, when it is taken out all finished for the market.
It should have been stated that the pulp is prepared with a certain compound for the purpose of making the barrel perfectly oil tight. It should be borne in mind that oil will leak where water will not; and owing to the action of dampness and heat, the ordinary oil barrel will leak sooner or later, thus causing a loss of oil to a greater or less degree. This wood pulp barrel never can leak, owing to the character of the compound entering into its manufacture, and also owing to there being no staves to shrink. This is an invaluable advantage; for it will save to those engaged in petroleum trade thousands of barrels of oil annually. In addition to this advantage of tightness is the extraordinary cheapness with which it can be made, which will enable it to take the place of the ordinary oak barrel. It bids fair to become used entirely in the oil business. A company composed of well-known business men has been organized and incorporated, and the stock all taken, for the purpose of going largely into the business of manufacturing this seamless barrel. Works will be erected of sufficient capacity for turning out several thousand a day.—Sabbath Recorder.