AdventAI

PRINTING

By A. Smith

From Review and Herald, Vol. 59, No. 21., May 23, 1882

THE WONDERS OF A CENTURY.—No. 13.

BY A. SMITH.

PRINTING

The discovery of the art of printing, as practiced with movable type, is ascribed to John Gutenberg, of Mentz, about the year 1438. The printing-presses of early times were made principally of wood, were rude in construction, and very slow in the execution of impressions, two or more of which were required to cover the surface of a sheet. This press was in general use throughout Europe until the close of the eighteenth century. About that time the Earl of Stanhope constructed one of iron, of sufficient size to print the whole surface of a sheet.

A multitude of improvements speedily succeeded that of Stanhope’s, among the most popular being the Columbian press of American invention. This press was introduced into Great Britain in 1818 by George Clymer of Philadelphia.

In the United States, in 1790, Mr. Nicholson, editor of the Philosophical Journal, procured a patent for improvements, embodying almost every principle since applied.

In 1818, Moses Applegath and Cowper took out a patent for improvements on cylindrical printing machinery, modified varieties of which have since been constructed.

The “Walter” machine was perfected in 1868. By this press both sides of a sheet are impressed at one operation, from a continuous roll of paper, and it delivers the finished sheets at the rate of from twelve thousand to seventeen thousand copies per hour.

The “Bullock,” an American invention, does excellent book printing at the rate of 12,000 sheets per hour. The Metric Compositor, also an American invention, adapted to stereotyping, was brought into use in 1867.

TUNNELING.

Tunneling is a feat of engineering skill that was practiced to some extent even by the ancients. The earliest structure of the kind of which, I think, we have any account, was that made under the Euphrates at Babylon in the days of that city’s supremacy, to connect the two magnificent palaces on opposite sides of the river. The Romans made tunnels in the construction of their aqueducts. Herodotus speaks of a tunnel through a mountain on the island of Samos, whose transverse dimensions were 8x8 feet, and its length 4,247 feet.

Not until the introduction of the modern railroad system has tunneling as an art assumed such proportions in the dimensions of the works, and the mechanical skill displayed in their construction, as to mark the system as one of the wonders of this century.

The Hoosac tunnel, one of the most remarkable and costly pieces of engineering in America, was projected as early as about 1825, for the transit of a canal proposed to be built from Boston to Albany. But the canal project soon gave way to one of a railroad, the first survey for which was made in 1827. After various contracts with private parties had been thrown up, and less than one-fifth of the tunnel had been constructed, the State appointed a commission in 1863 to complete the work, which was accordingly done. The first train passed through the tunnel April 5, 1875; but it was not officially declared open for business till July 1, 1876. At present over three hundred cars pass through it daily. The total cost of the tunnel was about $14,000,000, and in its construction nearly two hundred lives were lost. It is 24 feet wide, and 20 feet high in the clear, and rises from each entrance to the center of the mountain. It is 4¾ miles in length. So accurately were the bearings taken from a survey made over the top of the mountain, a height of 1,700 feet above the termini of the tunnel, that when the headings from the central shaft and the eastern portal came together, the alignments swerved from each other only five-sixteenths of an inch.

The Mt. Cenis tunnel, connecting the railways of France and Italy, was begun in 1857 and finished in 1871, at a total cost of about $15,000,000. At Modane, on the French side, it is 25 feet 3½ inches at the base, 26 feet 2¾ inches at the widest part, and 24 feet 7 inches high, the arch being nearly a semicircle. At Bordounèche, the Italian end, it is 11¾ inches higher. It is all lined with stone masonry, except at the Bordounèche end, where it is lined with brick. It is over 7½ miles in length.

The St. Gothard tunnel, 9¼ miles in length, was begun in 1872, at an estimated cost of £1,896,945.

So long ago as 1798 the idea of connecting England with France by a submarine tunnel was entertained, and in 1802 a French engineer laid plans for such a work before the First Consul. But the wars of that period put off the consideration of his plans, and when he died the matter was forgotten. Many plans have since been proposed, the most colossal of which was that of M. Thomé, which he laid before Napoleon III. in 1857.

According to this plan, which has been very favorably entertained, the submarine portion ofp. 324 the tunnel is to be cylindrical in form, and arched in solid stone, twenty-nine feet wide by twenty-two feet high, eighteen and a half miles long, having a double set of rails running through it, and, besides, a wide foot-path on each side. The extensions of the tunnel at the shore ends will aggregate over eight and one-half miles, making a total length of over twenty-six and one-half miles. Between the termini of the submarine portion, thirteen islands are to be constructed to connect with the tunnel, furnishing ventilation from above, and by means of spiral stairways, allowing the ingress or egress of passengers who may wish to take a train for Paris or London, or a passing vessel for some marine port. The total cost of the work is estimated at $34,500,000.

Work has recently begun on such a tunnel, but on what definite plan, the writer is not informed. The jealousy of the nations immediately interested, however, serves, according to report, to retard the work. If ever completed, the difficulties to be surmounted in the construction of the tunnel demand a magnitude of proportions not probably overdrawn by the plan of M. Thomé.