Manufacture of Cotton and Linen

7%

Seventh-day Adventist Publishing Association · Battle Creek, Mich. · May 2, 1882

FromReview and Herald, Vol. 59, No. 18.

Read the full edition

Manufacture of Cotton and Linen

The Wonders of a Century.—No. 11.

BY A. SMITH.

Manufacture of Cotton and Linen.

The origin of the cotton plant is not definitely known. It is supposed by some to have originated in Persia; but there is evidence of its also having been known in Mexico and Peru long before the discovery of those countries by Europeans.
Cotton cloth was gradually introduced into Greece and Rome from India. There are records of its use in 63 B. C. The term “calico” is from Calicut, which, with Surat, was an ancient cotton mart for the supply of the western nations of Asia. According to Tavernier, a French traveler, some qualities were exceedingly fine; and the thread, when spun, was scarcely discernible, a single pound being 115 miles in length. Since then it has been made in England so fine that a single pound of the thread was 1,026 miles in length. There are accounts of muslin made in Bengal so fine that when laid upon the grass and covered with dew it was not discernible. The Egyptians excelled in the art of spinning and weaving, and the Israelites no doubt acquired proficiency in the practice while in that country. Some of the Egyptian mummy linen contains 270 threads to an inch in the warp, and 110 in the woof.
From time immemorial the method of spinning cotton and linen was to wind it on a stick called a distaff, which was held under the left arm, the thread being drawn out with the fingers and twisted, and then wound upon a spindle held in the right hand. This mode continued in use in England until about the beginning of the sixteenth century, when the spinning wheel was introduced from India. The first mill in England for spinning flax was erected in Darlington near the close of the last century.
Brazilian cotton began to be used in England in about 1825.
Cotton seed was first planted in the United States in 1621, but it was little known, except as a garden plant, till after the Revolutionary War. In 1748, a small shipment of “cotton wool” was made from Charleston.
The earliest importation of raw cotton into England from India was in 1783. In 1700, about 1,000,000 pounds was consumed in Great Britain. In 1786, the consumption had increased to about 4,000,000; and in 1870 to 1,101,191,280 pounds.
In 1767, James Hargreaves, of England, invented a spinning jenny—so called from gin, a contraction of engine—consisting of eight spindles, which was soon increased to eighty. Upon this machine Richard Arkwright made important improvements, and in 1782 he had five thousand persons employed in his mills. In 1779, Samuel Crompton invented the mule jenny, a combination of the Hargreave and Arkwright machines, at first designed for twenty or thirty spindles, but afterward enlarged to carry twenty-two hundred, kept in operation by one attendant.
The manufacture of cotton was introduced from Scotland into the United States at East Bridgewater, Mass., in about 1786; and about two years after, a company was formed for its manufacture at Providence, R. I. But the manufacture was slow and imperfect, the machines being operated by a hand crank. In 1789 Samuel Slater, a young man, came from England to the United States, bringing with him a thorough knowledge of the business, and in 1790 his first Arkwright machine was completed and run by the water-wheel of an old fulling mill. He had to bring his plans from England in his mind, as no written or printed plans were allowed to pass the custom officer. Other mills were soon erected, but, up to 1813, these machines only spun the yarn, all the weaving being done in hand looms. In that year the first mill combining the spinning and weaving operations was erected at Waltham, Mass. It was probably the first in the world combining all the processes for converting the raw material into cloth.
In 1870 there were 956 establishments in the United States for the manufacture of cotton, running 157,810 looms and 7,132,415 spindles, and employing 135,369 hands. In 1871, there were in Great Britain 2,483 manufactories of cotton, employing 449,087 hands, with an investment of nearly £60,000,000 capital. There were also in that country 500 factories for the manufacture of linen, running 1,553,335 spindles, and employing 124,772 operatives. Besides establishments for dressing flax, there were in the United States, in 1870, ten manufactories of flax and linen goods, valued during that year at $2,178,775.
A single machine can now make 2,000 or 3,000 pieces of linen a week; but about seventy-five years ago it would have served the largest works for a whole year. (Condensed from the American Cyclopedia.)