SUGGESTIONS AND ILLUSTRATIONS

5%

Seventh-day Adventist Publishing Association · Battle Creek, Mich. · Jan 25, 1898

FromReview and Herald, Vol. 75, No. 4.

Read the full edition

SUGGESTIONS AND ILLUSTRATIONS

NATURE STUDY.—NO. 4.

IT seems best in this lesson to speak of a number of things that are related to the preceding lessons, and also to those that will follow. So, as a foundation for the questions, we offer the following—

SUGGESTIONS AND ILLUSTRATIONS.

Strike a bullet or other small piece of metal several times with a hammer. Does it become hot? Rub the palm of your hand briskly back and forth on the surface of the table. What do you feel?
Where did the heat in the bullet and your hand come from; that is, what was changed into heat? Was it the force or the motion that was changed into heat?
If you are in doubt, try the experiment again, in such a way that the light will throw a shadow of the hammer or your hand on the wall. Now, was there not as much motion in the shadow as in the arm? Was it the motion that was changed into heat?
It is important to get a clear idea of the terms “force,” “motion,” and “energy.” It may be illustrated thus: Force is energy set in motion. Energy itself may take several different forms, as weight, heat, electricity, light, etc. The important thing to remember is that energy cannot be destroyed, it can only change its form. When the energy of the hammer in motion is suddenly stopped, it reappears as heat. When it is more slowly resisted, as in the other experiment, heat is also produced. When the energy of an electric current is resisted by the filament of carbon in an incandescent lamp, it shows itself both as heat and light. (Don’t call the black filament in such a lamp a “wire,” it is composed of carbon,—like charcoal,—made from a special kind of bamboo. A metal “wire,” if it were large enough, would easily conduct the current of electricity without resistance, and so would not become incandescent.)
Why is the air all shut out of an incandescent electric lamp?—Because the union of the oxygen and carbon would burn up the filament and put out the light. Carbon and oxygen have such attraction for each other that the force with which they come together produces the heat we see in a wood or coal fire.
But in order to “make a fire,” we must in some way raise the temperature to the “kindling point.” (See Youth’s Instructor, December 23, page 403.) We can heat a match sufficiently to “light” it by rubbing it briskly across a rough surface. This heat is produced by friction. The heat of the lighted match, applied to gas, oil, or dry wood, sets their carbon into rapid combination with the oxygen of the air. When the “fire” is thus once started, the carbon and oxygen “do the rest.” We can increase the fire by adding more fuel and more oxygen, or stop it by keeping them apart.

SUMMARY OF QUESTIONS.

1. When a body in rapid motion is instantly stopped by coming in contact with another, what is produced?
2. How do energy, force, and motion differ?
3. What is friction? Does it produce heat? Anything else?
4. How is the energy of a train of cars turned into heat when the train stops?
5. Why do you oil the sewing-machine?—To save the energy of working it from being turned into heat by friction.
6. What makes the electric lamp hot? Does it have a “wire” inside? What is it? What would happen if air should be let inside the lamp?
7. Will iron burn up in pure oxygen? What substance burns, even when exposed to ordinary air? (Instructor, same page.)
8. Where does the energy in wood and coal come from originally? In natural gas? oil? (See Christian Educator for January, page 105.)
9. What elements in food are especially needed as fuel for maintaining the heat of the body? (See Gospel of Health for December, page 170.)
10. What does the Bible say about fire kindling?