The manufacture of paper pulp and paper from common grass is one of the latest novelties for which a patent has been obtained. Any of the common grasses found in the field, lawn, or meadow, may be used; and it is claimed that the green grass pulp produced from them may be manufactured into paper of great strength and length of fiber, and possessing tenacity, softness, and flexibility; and further, that this paper is even softer and more transparent than that made of linen. One pound of dried grass gives about one-third to one-fourth of a pound of fine, bleached, and finished paper, or 2,911 pounds of finished paper to the acre.
So long as the sap is in circulation, and the chlorophyl, silica, and other inorganic matters are not dried in, in which event the fiber is seriously impaired for the purpose of paper, either old or young grass may be used; but, to avoid danger, it is best to have the grass cut or mown before it begins to bloom.
The first process of manufacture is to pass the grass between the rollers of a press, which crushes or loosens the fiber and squeezes out most of the sap. It is then freed from dirt by being thoroughly agitated or washed by other means in a large tank of water. After sufficient washing, the crushed grass is boiled in an open kettle, or in a steam kettle with lye. With an open kettle the boiling is continued from four to five hours; with a steam kettle two hours will suffice.
From the kettle the material goes into a filtering trough of magnesia for about thirty minutes, then is placed a third time in a solution of carbonate of soda; and, finally, a second time in a solution of sulphuric acid. These operations may be repeated more or less till the pulp is as fine and white as required, after which it is washed in clear water.—The Paper World.