AdventAI

HOW SPOOLS ARE MADE.

From The Youth’s Instructor, Vol. 30, No. 16., April 19, 1882

At Drummondville, on the St. Francis River, Canada, on the line of the northern division of the South-eastern Railway, there are large factories for making spools from white birch, which grows in profusion there. The farmers get from two dollars and fifty cents to three dollars per cord for the wood, which, after being delivered to the factories, is first sawn into pieces about four feet long and from an inch to an inch and a half square, according to the size of the spool it is desired to make.

These pieces are put into a stove and thoroughly dried, whence they are taken into the factory and given to the “roughers,” who in a short space of time bore a hole in the center a couple of inches deep, turn about the same space round, and then cut off the length required for the spool. The machines used for this purpose are revolving planers, in the center of which is a revolving gimlet or bit, and immediately to the right a small circular saw with a gauge set to the proper size for the spools.

One proprietor ships over two million spools per month to England, and another firm ships over one million to Scotland.