AdventAI

The cost of fish-hooks is so trifling that perhaps you have never thought that it requires time, labor, and even skill to manufacture them. A writer in the Sunday-School Advocate says:—

“Combined with the manufacture of needles, there is one town in England, of considerable size and importance, that depends almost entirely on needles and fish-hooks for its well doing.

“If you could visit its factory, you would soon see that the variety of fish-hooks made is surprising, and the number in demand enormous. The cod-fishery alone draws on the manufacture for millions of hooks year after year. One of the heads of the Milwood firm at Redditch says that a few years ago, it being a comparatively slack time, they set some of their hands on the work of making these hooks for the cod-fish, and accumulated a couple of million, which one would reasonably suppose would be regarded as sufficient stock on hand, but exactly at this time, came from a foreign house an order for three million hooks of the exact pattern, and in a month or so the full commission was executed.

“There are two kinds in the market, the English and the Irish, or Limerick fish-hook. The latter were long in repute among anglers, but now it is said the largest number are made at Redditch, in Worcestershire.

“The process of making them is thus described: Steel wire is cut into the required lengths, and softened; then the ends of these bits of wire are inserted into shallow holes, in a sort of rest, or standard, and thus supported, the barbs of all three together are cut up by the skillful pressure of a stout knife. They are then pointed and turned by pressing them against a little ridge of sheet brass let into a block of wood having the requisite curvature. The other end is next flattened out by laying it on a small anvil, and striking a blow with a hammer. This is done to prevent the silk ligature from slipping over the end. The finer worm hooks have the shanks filed in order that the silk dressing may not enlarge the shank so much as to prevent the slipping of a small worm over it. They are then hardened, tempered, and blued.

“The Limerick hooks are made by cutting the steel, which is made from the best malleable iron, into lengths for two hooks. The ends are then forged out to the shape of barb and point, and the barb is undercut with a file for the solid forged end, instead of being cut and turned up with a knife. On this the reputation of the Limerick hook depended. They are shaped in the required curve by grasping them in circular pliers, and bending the wire with a turn of the wrist.

“There are many curious hooks made, and of all sizes, from that required to catch a shark, or even a still larger hook, strong enough to serve as a meat-hook to roast an animal whole, to such tiny ones that a dozen of them can be taken up on the finger tip. These latter go to the remote parts of India, though it is not known for what kind of fishing they are required.”