AdventAI

HOW STONEWARE IS MADE.

From The Youth’s Instructor, Vol. 33, No. 38., October 7, 1885

It seems almost marvelous that stoneware can be turned out so rapidly with such simple machinery. Verily, “man hath sought out many inventions.” A writer in Treasure-Trove gives the process of manufacturing this article, as follows:—

“Stoneware,—crocks, jars, jugs, etc.,—is made of potter’s clay, found in many of the United States. It is of a light grayish color, very heavy, a bushel weighing about a hundred pounds. It is found in ‘veins’ or deposits near the surface, and is mined by first removing or ‘stripping’ the earth from the top of the deposit, when the clay can be dug easily. The peculiarities of the potter’s clay are its color, weight, and freedom from grit. It is conveyed to the potteries in tram cars or wagons, and ground in a large clay-mill, sometimes turned by horse-power, but at the larger potteries by steam. The mill is simply a large circular box, in which large iron knives and heavy metal wheels revolve. When the clay has been sufficiently ground, it is taken out and made into balls or blocks, sixteen or eighteen inches square, and placed in a damp cellar, ready for use.

“Each ‘turner’ has a wheel or lathe, about sixteen or eighteen inches in diameter, and which is made to run horizontally, and is operated by a treadle. A piece of the clay which has been well worked or kneaded, and from which all hard lumps or pieces of gravel have been carefully removed, is placed on the middle of the wheel, which the turner causes to revolve rapidly, while with his hands, a sponge, and a small thin piece of cedar wood, called a ‘rib,’ he succeeds, in a minute or two, in developing out of the lump of clay a shapely jar or crock. Stopping the wheel, he cuts the vessel from it with a fine wire passing under the bottom. The jar is now placed on a long board. When the board is full it is taken to the dry-room, where there are scaffolds for holding them in tiers, one above the other.

“The flowering and lettering on stoneware is usually done by hand, with a brush or stencil before the ware is fired. The inside glazing is a mixture of water and clay, called ‘slip,’ which is injected into the vessel with a force-pump. The ware is then put into large circular kilns, built of stone and lined with bricks.

“The ware is placed in circular rows, the entire space being filled, and small pieces of sanded clay being put between the vessels to prevent their sticking together. The floor and top are full of holes, so that the fire which is built underneath may pass up through. It takes from three to five days to burn a kiln thoroughly. Just before the firing process is completed, a man with a bucket of salt and a long iron spoon, goes to the top of the kiln, and throws the salt down among the ware. It is this simple operation which gives to the ware its smooth, glassy appearance, or glaze. The fire is then allowed to die out, and in a day or two the kiln is opened, and the ware taken out, assorted, and stored away for sale.”