HOW GLOBES ARE BUILT

33%

S. D. A. Publishing Association · Battle Creek, Mich. · Aug 26, 1885

FromThe Youth’s Instructor, Vol. 33, No. 32.

Read the full edition

HOW GLOBES ARE BUILT.

Artificial globes are meant, such as are used in the library and school-room as helps in our studies. Haven’t you often wished to know how they are made with such nicety and accuracy? The following, from an exchange, gives the process of globe-making:—
“The material of a globe is a thick, pulpy paper, like soft straw-board, and this is formed into two hemispheres from disks. A flat disk is cut in gores or radial pieces, from center to circumference, half of the pieces being removed, and the others brought together, forming a hemispherical cup. These disks are gored under a cutting press, the dies of which are so exact that the gores come together at their edges to make a perfect hemisphere. The formation is also done by a press with hemispherical mold and die, the edges of the gores being covered with glue. Two of these hemispheres are then united by glue and mounted on a wire, the ends of which are the two axes of the finished globe. All this work is done while the paper is in a moist state. After drying, the rough paper globe is rasped down to a surface by coarse sand-paper, followed by finer paper, and then receives a coat of paint or enamel that will take a clean, smooth finish. The instructive portion is a map of the world printed in twelve sections, each of a lozenge shape, the points extending from pole to pole, exactly the same as though the peel of an orange were cut from stem to bud in twelve equal divisions. These maps are obtained in Scotland generally, although there are two or three establishments elsewhere which produce them. The paper of these maps is very thin, but tenacious, and is held to the globe by glue. The operator—generally a woman—begins at one pole, pasting with the left hand and laying the sheet with the right, working along one edge to the north pole, coaxing the edge of the paper over the curvature of the globe with an ivory spatula, and working down the entire paper to an absolutely smooth surface. As there are no laps to these lozenge sections, the edges must absolutely meet, or else there would be a mixed up mess, especially among the islands of some of the great archipelagoes and in the arbitrary political borders of the nations. This is probably the most exact work in globe making, and yet it appears to be easy because the operator is so expert in coaxing down the fullness and in expanding scanty portions, all the time keeping absolute relation and perfect joining with all the other sections and to their edges. The metallic work—the equators, meridians, and stands—is finished by machinery. A coat of transparent varnish over the paper surface completes the work, and thus a globe is built.”