STEEL is manufactured from iron, and is, too, a compound of carbon and iron. It may be made directly from the iron ore, from pig iron, or from wrought iron. If made from pig iron, it must have some of the carbon taken out, as pig iron contains more carbon than steel possesses. If it is manufactured from wrought iron, more carbon must be added, for wrought iron has less carbon than steel.
There are different processes for diminishing the amount of carbon in the iron, as there are also different methods for increasing it. The more carbon the steel contains to a certain limit, the closer is the grain of the steel, and the lighter its color, effects which are produced by hardening.
The principal characteristics of steel relate to hardening and tempering. If it is brought to a red heat, and cooled suddenly in water, oil, or some other liquid, it becomes hard in proportion to the amount of carbon it contains, the temperature to which it was raised, and the rate at which it was cooled. After being hardened in this manner, if it is heated again, and allowed to cool slowly in the air, it loses its hardness in proportion to the temperature to which it was reheated. The process by which these changes are made in steel is called tempering. All compounds of iron and carbon can be thus tempered. The temper of steel determines its value.
One’s success in hardening and tempering steel depends upon many conditions; the temper is decided by the color of the oxide which forms on the surface. The workman understands that lancets require a very pale yellow; razors and surgical instruments, a pale straw; penknives, a full yellow; scissors and cold chisels, brown; axes and plane irons, brown, with purple spots; table knives, purple; swords and watch springs, a bright blue; fine saws and augers, full blue; and hand and pit saws, dark blue. These colors are removed by the after grinding and polishing.
But there are a multitude of processes by which the work of tempering is done, and just the nature of the hardening process is not very well understood; so it requires great skill, or very nice discriminating powers, to do the work successfully, as the following extract from the Christian Union will show:
“To be able to properly temper steel springs and implements, may be considered a gift similar to that possessed by the ‘poet born.’ A man whose business in a certain tool shop was to temper springs, worked 22,000 consecutively, and of the whole number only six failed to pass the test; but during this man’s temporary illness, more than half the springs handled by his assistant, who had been under instruction a year, failed. In a large manufactory of sword blades, one man does all the tempering, being called in from other employment at intervals, because, although he has always been willing to instruct others, he has never had a pupil who could equal him in the work. There is a large scythe manufactory in a New England town making 14,000 dozen scythes a year; and the president has, for years, hardened and tempered every scythe that leaves the works, because no other man in the works can do it so well.”