As the boys and girls make their toilet sometimes before the mirror, do they not frequently wonder how such a piece of workmanship was wrought? It certainly seems like very particular business to spread evenly over glass anything which has the habit of creeping away so like quicksilver. A writer in Golden Days gives the process as follows:—
“In silvering looking-glasses a large, perfectly flat stone table is provided, upon which a sheet of tin-foil, without crack or flaw, is evenly spread. This is covered uniformly to the depth of one-eighth of an inch with clear mercury. The plate of glass, perfectly cleansed from all grease and impurity, is floated carefully on the mercury, so as to exclude all air-bubbles. It is then pressed down by loading it with weights, in order to squeeze out all the mercury which remains in a fluid state, this surplus being received in a gutter around the stone. After remaining in this position for about twenty-four hours, it is raised gently upon its edge, and in a few weeks is ready to frame. It is said to be desirable to have the lower end of the glass from which the mercury was drained at the bottom of the frame, as the surface is generally roughened a little at that part.”
We may learn something here, perhaps, about mirrors. By its shape, one cannot always tell which end of the frame was designed for the top; but by examining the glass, we may be able to have the most perfect part where it will be most useful. The same writer also tells how to repair the silvering of looking-glasses. The method is this:—
“First uncover and clean the damaged spot by very careful rubbing with fine cotton until there is no trace of grease or dust. Then, with the point of a knife, cut the size of the required piece on the silvering of another glass; drop a small globule of mercury (the size of a pin’s head for a surface the size of a finger nail) upon the cut piece. The mercury penetrates the silvering as far as the cut and allows of the removal of the piece. Transfer this to the spot required to be repaired, and press it on with a piece of soft cotton.”