The word “bullion” means uncoined gold and silver in the mass. Large quantities of gold and silver, after being coined, are frequently termed bullion. The following paragraphs from a recent exchange contain facts of interest in addition to what has already been published regarding the precious metals, both coined and uncoined:—
“Bullion is received at the mint in the form of bricks of all sizes and very peculiar shape, when it comes from Spanish American countries. The regular shaped bricks often weigh as heavy as 150 pounds. The Mexicans melt their silver and rub it into the most crude shaped molds in the world, in quantities so large and heavy that a burro [donkey] could not carry one casting. If the valuable metal was carried in quantities convenient for handling, raiders for miles around would be after it and demand the whole or a large portion of the silver as salvage for protection against other raiders. The Mexican silver received at the mint is taken to the machine shop and cut up before it is in shape to be put into any of the largest crucibles. The regular shaped bricks are taken first to the assay office, where the corners are clipped and the brick bored into. An assay is made of the clippings and borings. The result is made known to the person making the deposit, in about twelve hours. He gets his money, and the government gets his bullion. After the assay the bullion passes to the refinery if it should require the operations there performed.”
“When the silver has been obtained in a state as near as possible to absolute purity, it is taken to the press room, and by hydraulic pressure compressed into solid circular masses of from twelve to fifteen inches in diameter and five inches thick, resembling very much the shape of cheese. The silver is then placed in an oven in iron pans. A fire is raised, and the iron and oven are brought to a cherry red color for the purpose only of driving off moisture in the chloride of silver. The least portion of moisture in the crucibles would break them, and the silver would be lost in the ashes. The cakes next go to the melter and are run into bricks. If it goes on the market as bullion, its weight in ounces and its value is stamped upon each brick. If it is to be turned into coin, it is again melted and an alloy of one-tenth copper is put in both for silver and gold, and the whole is then run into ingots.”
“These are heated and rolled to the proper thickness and width, and the strips are then annealed and whitened. The blanks are next punched and cleansed of the grease from the rollers, and are then sent to the adjusters. Each piece is weighed, and if found too heavy a little is filed off the edge; if under weight, it is remelted. From the adjusters the blanks pass to the stamping room. The milling, as it is generally termed, is then put on, by pressure-squeezing the silver out into the little grooves of the mold.
“After it is upset, to raise the ring on the surface, the blank passes under the die. The impression is made on both sides from one blow.”
“A rule of the coiner’s department prohibits an employee leaving the department during the day until after the accounts are adjusted. From the coiner the money passes to the counter, who with the aid of a counting board, which holds an exact number of pieces, is able to count thousands where a person ordinarily would count only units. The counting board carries just 1,000 silver dollars. One of the most interesting objects to be seen in mint is a large balance scale, so nicely adjusted that one may take a hair from the head, split it and place it on one side of the scale pans, and the beam will be noticeably deflected.”