OLD EGYPTIAN SKILL

50%

S. D. A. Publishing Association · Battle Creek, Mich. · Apr 28, 1886

FromThe Youth’s Instructor, Vol. 34, No. 17.

Read the full edition

OLD EGYPTIAN SKILL.

THE ancient Egyptians excelled in nice mechanical work, and it might puzzle some of our masons and stone-workers to equal them at the present day. Mr. Kendrick, in speaking of the casing of the great pyramids, says: “The joints are scarcely perceptible, and not wider than the thickness of silver paper, and the cement so tenacious that fragments of the casing stones still remain in their original position, notwithstanding the lapse of so many centuries and the violence by which they were detached. All the fine work of the interior passages, where granite is not expressly mentioned, is of the same stone, and finished with the same beautiful exactness. But the skill in quarrying was displayed more in the extracting of the huge blocks out of which obelisks and colossal statues were hewn. Obelisks ninety and statues forty feet high, each fashioned out of one stone, were not uncommon things; and the blocks selected for these monuments were not chance splinters from barbarous efforts of splitting and smashing, but clean slices separated secundum artem from the native rock, after being selected and accurately defined. And how was this done—by driving in huge iron wedges? No, indeed; that would probably have split the stone. By infinite labor, then, in chiseling and sawing? The old Egyptians knew a trick somewhat cleverer than that; they cut a small groove along the whole length of, say, one hundred feet, and in this inserted a number of dry wooden wedges; they then poured water into the groove, and the wedges expanding simultaneously and with great force, broke away the large fragments as neatly as a strip of glass is taken off by a diamond.”—Classmate.