AdventAI

HOW CHAIRS ARE MADE.

By Dudley Marvin Canright

From The Youth’s Instructor, Vol. 34, No. 21., May 26, 1886

A CHAIR is something that each of us uses every day. Do you ever stop to inquire how they are made? who made them? of what they are made? and where? We ought always to inquire about these things; for that is the way to learn. Have people always had chairs? I do not think Adam had any; and doubtless the first ones were very rude. But now they make them very nice and easy. As we have a large chair-factory in Otsego, I went this morning to look it all through, so as to tell the INSTRUCTOR children how a common chair is made. The factory is that of C. D. Stewart and Co. They make nearly three thousand chairs a week and employ one hundred hands. The hands receive from two dollars and a half to twenty-two dollars a week, according to their skill. They have to keep constantly on hand about one million five hundred thousand feet of lumber, and the work requires a capital of about fifty thousand dollars. All the work is done by machinery, and the factory is run by water.

Mr. A. D. Baker, the foreman, very courteously showed me around, and explained every thing. It would make too long an article to tell you all about it, but I will give you a fair idea of it, if you will think carefully of what I say. Beech, elm, hickory, and maple are the woods chiefly used. Examine your chairs, and see if you can tell what kind of wood they are made of. A tree is first cut in the woods, and a log from this is drawn to a mill, where it is sawed into boards about an inch thick. These boards are then taken to the factory, where they are cut up with a rip-saw into pieces from twelve to twenty-two inches long, and from an inch to an inch and a half square.

Now look at the legs or some pieces of the chair. You see they are nicely carved in various ways. It looks as though it would be a long job to make one; but it is not. One of those square, rough sticks is put into a machine called a lathe, which has a peculiar, sharp knife. The lathe runs by machinery, and in a few seconds it will turn out one of these pieces all nicely shaped and molded. A man will do it about as fast as he can pick them up and lay them down. In a similar manner every round piece of the chair is made. Then the pieces are carried into a hot room where they are thoroughly dried.

How are those crooked pieces in the chair made to keep in place? They did not grow so. Well, long, straight pieces are put in a hot place, and are steamed for several hours, until they will bend without breaking, just like a piece of wire. Then they are put into an iron frame crooked in just the right shape. Now they are placed in a dry, hot room, called the kiln, where they remain two days. They are there thoroughly dried. When taken out, they will stay in just the shape in which you have dried them. That is the way all the crooked pieces are made to stay crooked. But the best timber used in making chairs is dried in the open air. In order to become thoroughly dry, it is kept from two to four years drying.

After the separate pieces of the chair are cut, and worked into the right shape, they are yet rough. For the cheaper chairs, these are all thrown into something like a great hogshead, or barrel, which is turned over and over for a long time, and the pieces smooth themselves by rubbing one against the other. Others are smoothed on a sand machine. This is a large wheel, and it looks just like a grindstone. It is turned by machinery, and the pieces of the chair are held on this until they are smooth. But the best chairs are rubbed smooth by hand, with sand-paper.

The seat of a wooden chair is cut in the right shape by machinery. Often the seat is made of two or three pieces carefully joined together. There are machines on purpose for doing this. The holes for the arms and backs are bored by machinery. In fact, all the work on the chair from first to last, is done by machines. There is a planer, jointer, shaper, boring machine, seat digger, and many more. Here is a disk saw. It hollows out the seats of chairs. Altogether there are about fifty different machines used in making a chair. From first to last, a chair goes through the hands of about fifty different persons before it is completed. Each man just does one part and only one. One man makes the back, another saws the bottom, another makes the legs, still another does the gluing, another the sand-papering, another bores the holes, etc. He stands there by his machine, and does the same little thing over and over hundreds of times a day, and all the year round. He could not make a whole chair any more than I could, but he can make his part of it just right. By working at the same thing year after year he becomes very expert at it. We should learn from this to stick to one thing till we have it perfect.

This factory makes some sixty-five different kinds of chairs. I had no idea that there were so many. I thought eight or ten kinds were all. These are sold for from thirty cents to eight dollars apiece. Some are seated with cane, as you see. The frame is made here, the holes are all bored, and then it is shipped to Lansing, and by very cheap labor, the seats are made, and then it is shipped back again. From this factory, they ship these chairs to all parts of our country, even to California, and some to China. Some are shipped all put together, and painted, and ready for use; but many are shipped in what they call, the “knockdown;” that is, the different pieces of the chair are all made ready to put together, but not set up. The separate pieces are packed and shipped that way. This saves space, you see, and makes the freight cheaper. Furniture dealers in different cities buy them that way. By a few minutes’ work, they can put a chair together, and then it is painted and sold. This will give you something of an idea as to how a common chair is made.

D. M. CANRIGHT.