AdventAI

HOW BROOMS ARE MADE.

By C. S. Veeder

From The Youth’s Instructor, Vol. 34, No. 24., June 16, 1886

The first brooms made in this country were manufactured by the Shakers at Watervliet, New York, about the year 1798, and were readily sold at fifty cents apiece. For many years this business was confined almost exclusively to the Shakers, and they gained so good a reputation for making a substantial broom, that even to-day their brooms are, in many localities, preferred to others, although they are really no better.

The first brooms were tied with twine instead of wire, as at the present, and were clumsy and uncouth in appearance. The broom maker, seated in a chair, had his twine wound on a round stick and placed between his feet. The handle for the broom rested upon his lap, and the brush was placed under the twine and rolled round the handle, the twine drawing it down tight, the tension coming from the stick under the feet. We can imagine that in this rude way no very nice broom could be made nor a great many in one day.

But the fertile brain of the Yankee could not long endure such a primitive method of doing things; and a few years later other ways were devised for more rapidly making better and neater brooms. One machine after another was invented, each an improvement on those that had gone before, until we now have a very convenient one, which is used by nearly all broom makers.

The very first thing to be done toward making a broom is to soak the brush in water so as to make it pliable, and then to place it in a tight box, or house, made on purpose, in which a small quantity of brimstone is burned. The smoke of the brimstone bleaches the brush, and makes it look brighter and fresher than before. After bleaching, the brush is laid upon a bench and sorted over for lengths and grades. The longest stalks are called hurl; the next in length, covers; and the remainder, inside, each intended for a different place in the broom.

The hurl stalks are taken by a man or boy, who, with a sharp knife, cuts off the butt-ends of the stalks in such a way as to leave a portion of the splints still fast; these splints are then separated from the part cut off, and, after the coarse center stems are picked out, are ready to form the outside covering of the broom.

Each broom maker has a machine so constructed as to hold his brush ready for the broom, the handle, the tools to work with, and a spool upon which the wire is wound. Everything ready, the broom maker first puts the handle in the barrel of the machine, and secures it with a thumb-screw. The wire, which is on a spool directly in front of the workman, and within easy reach, is then fastened on the end of the handle, and is of such tension as to securely hold the broom. This done, a small handful of brush is placed under the wire, and by means of a foot treadle the handle is made to revolve, and the brush is evenly distributed. Another handful is then placed on one side of the broom, and another on the opposite side, to form the shoulders. The workman then seizes a large, sharp knife, and trims off the stalk ends in such a manner as to form the shoulders, the whole being wrapped with wire.

Over this is next placed another covering, composed of the second length brush, called covers. These are dexterously wound around the handle in such a manner as to cover up the rough edges made by cutting the shoulders. Over this is placed the last finishing coat, the hurl above-mentioned. Some broom makers take great pride in showing their skill by weaving and braiding various devices on the neck of the broom with the hurl, finishing the broom very handsomely.

When the broom leaves the hand of the tier, it appears to be round. It is then pressed in a vice and made flat, ready to be sewed. The man who does this has on each hand a cuff, in the palm of which is a steel plate; and with a long needle pointed at both ends, and the eye in the center, the string is sewed through and through the broom. The ends are then trimmed off, and the broom is done. A smart workman can make from four to five dozen brooms a day, when the brush is prepared for him.

Brooms are manufactured largely in Chicago, St. Louis, Mo., Amsterdam, N. Y., and in many other cities in the United States, and besides there are many small factories all over the country. In some States, brooms are made by prisoners in the state-prisons, and even by the blind in the asylums; but of course these are not so neatly made as those of other factories.

When you select a broom at the store, you should pick for one that is green and fine and not very heavy; and when not using it, you should hang it up, or set it up on the handle, and not on the brush end.

Now, I do not expect that from this brief description of broom making any of you could go to work and make one. You would have to educate your hands to apply the brush, just as you would have to have the practice to do any piece of work. First theory, and then practice. I have given you theory, and leave you to get the practice.

C. S. VEEDER.