Bread is called the “staff of life;” and probably it is the most essential article of food we have. We hardly ever think of eating a meal without it. We can do without fruits, vegetables, meat, or almost anything, but not without bread. We know that our flour is largely made of wheat, but how many children understand how it is made?
Going back to the most ancient times, flour was first made by pounding the wheat between two stones. Afterward it was pounded in an iron vessel.
But in Bible times, we read about grinding, and the mill, and the nether millstone, and the upper millstone. These mills consisted of two flat stones about two feet in diameter. They were fitted so that one was turned around on the top of the other. The handle was fastened in the outer edge of the upper stone, and a hole made in the center of the stone. Then the wheat was put into this hole, and two women sat down on the ground and turned the mill. Of course the wheat came out bran, middlings, and flour, all together. At first it was cooked in that way; but afterward a sieve was invented, by means of which the coarser particles were sifted out. But even then the flour was dark and coarse compared with what we now have. But it was just as healthful, for all that.
Flour mills have now been brought to great perfection, so that fine work can be done. The latest invention is what is called the roller-mill process. In this process the miller first takes a bushel of wheat and puts it through a machine that will take out all the chaff, poor kernels, chess, and the like. Then he puts it into another machine which takes off all the fuzz, splits the kernel open, cleans out the dirt in the crease, and takes the germ out, that is, the soft part in the kernel, which grows when planted. Then he takes these broken parts of the kernel, and puts them into other machines, which take them all to pieces, the bran going in one place, the coarser flour in another place, and the very fine in another place. The machinery for doing this is very fine, and too complicated to be described here.
But let us take the ordinary process. The wheat is carried into what is called the hopper, a box that will hold five or six bushels. There is a hole in the bottom of this box, through which the grain gradually runs into the center of the upper millstone. These two stones are about four feet across and nearly a foot thick. They are extremely hard. There are none in this country fit for the purpose, hence they have to be brought all the way from France, and of course cost a good deal. The lower one lies flat on the floor, with an iron projection in the center. The upper millstone fits over the lower one, and rests on the iron projection. It is balanced exactly, and runs so closely to the lower stone that a hair could not go between them, and yet it does not touch the other. The wheat works in between these stones, and as the upper one revolves rapidly, it is ground very fine between them. It comes out from between these stones on one side, and is conveyed in a spout to another part of the mill, called the bolter. Here, by means of this machine, the fine flour is separated. First comes what we use for bread. Then the coarse part of the wheat, the bran, is taken out in another place. Of course, there is a very little flour remaining in the bran. But between the bran and white flour is another part, called the middlings. It is darker than the flour, but lighter than the bran. It is generally fed to cattle, but may be used for bread.
There are sixty pounds of wheat in a bushel. Every child should remember this fact. Forty-two pounds of flour is what it is estimated a bushel of wheat will make, and four pounds of middlings, and eleven pounds of bran. That leaves two pounds for waste. This is the amount that you will get back for a bushel of wheat, if you take it to the mill and pay for grinding it; but commonly the miller takes what is called the “toll,” for his part, that is, one-tenth. In this case, you will get back thirty-eight pounds of flour, ten pounds of bran, two of middlings. If the mill is run by steam, the law allows the miller a higher rate of toll. In that case, he can take out one-eighth. Generally, mills are very costly affairs. An ordinary mill costs several thousand dollars. In early days, milling was a very profitable business, but now it is not, except in a few favored localities.
D. M. CANRIGHT.