EVERYBODY knows what hoes are. Little boys and girls think it a great treat to have one. However, I notice that many of them, when they are a little older, seem to lose their admiration for it, especially when the hoe needs to be used all day in the garden or among the potatoes.
We do not know when they were first used, but we do know that the most ancient hoes were very rough, awkward things. They were made of wood tied on to a stick. When they came to be made of iron, they were very heavy and awkward; but now they are so improved as to be sharp, light, and easy to handle.
As we have a hoe-factory in Otsego, I went over this morning to see how a hoe is made. We might suppose that such an instrument could be made easily; but I found that it required much machinery, many hands, and several operations to make a hoe. Of course they are made of steel. This is bought in cast-steel bars, which are a little over half an inch thick, three and one-half inches wide, and about sixteen feet long.
We will now notice the different steps taken to make a hoe. First a steel bar is put into a power-press, where there is a great pair of shears. These powerful shears cut this steel bar into pieces five and one-fourth inches long, and do it as easily as a knife would cut cheese. One man can cut a thousand pieces a day. These pieces are then heated, and cut into two pieces, each one something like the letter T. This piece is then taken to a powerful machine called a trip-hammer, which is run by steam, and keeps striking with very heavy strokes on an anvil. The iron is heated, and by constant hammering the shaft, or shank of the hoe, that which connects the blade with the handle, is drawn out into the proper shape. One man will make eight hundred of these in a day. The socket, or that into which the handle is inserted, is next made from Norway iron, which is cut up into small pieces, and made into a round tube, like a tunnel. The shaft of the hoe is now placed into this socket, which is also hot, and then put under another heavy trip-hammer, where with three blows they are welded together. It is now carried to another trip-hammer, and pounded, to bring out what is called the boss, or the thick part of the hoe next to the handle. Six hundred is a day's work here. It is now carried to another machine called the plating roller, where it is subjected to a powerful pressure, which rolls the blade of the hoe down to the proper thickness. From this it is carried to another machine, where, with a die, it is cut into just the shape of a hoe. The edges are sheared off as you would cut a garment with shears. Up to this time, the iron has not looked so much like a hoe as like a rough, ill-shaped paddle; but now it is trimmed, it looks like a little spade. It is next taken to the fire, and heated and tempered, so as to make it hard,—hard enough to cut a nail. Then it is heated again, and the temper is taken out of the upper, or back part of the hoe, so that it will be tough, and not break readily. From here it is taken to a stone, where it is ground smooth. This takes off all the scales and rough places. Next it is taken to a machine which polishes it on the under side. Once more it is taken to another place, and the shank—that which goes into the handle, and connects the handle with the blade of the hoe—is now bent. Up to this time it has been straight, like the handle of a spade; now it looks like a hoe. Once more it is taken to another place, and polished all over nicely. It is carried now to still another place, where the handle is put in, and a nail is driven to hold the handle into the shaft. The shaft and socket of the hoe are now varnished, and coated with bronze, which looks very much like gold. Next the label of the firm is pasted upon the handle, and the hoes are tied up with burlaps, or coffee sacking, and twine. Now they are ready to be shipped anywhere.
So you see, children, it takes sixteen different operations to make one hoe, and it requires a large amount of powerful machinery to do it. This firm makes six kinds of hoes. The hoes of to-day are not more than half as heavy as they were twenty years ago. They are sent from this factory mostly to the West, but some to the South. They sell for three dollars per dozen, or twenty-five cents apiece. That seems cheap enough, considering the work it takes to make one. This firm employs, in the winter, twenty-five men, who can make six hundred hoes per day. Now, when you take up your hoe, think how it was made. Probably, from twelve to sixteen men have worked on that hoe to make it. And let me add that a good workman will always keep his hoe bright and clean. Do not leave it in the garden or on the grass to rust and spoil. Keep it bright and neat, and then you will love to use it. D. M. CANRIGHT.