HOW COTTON CLOTH IS MADE.
I WONDER how many boys and girls have any idea of how cloth is made; or how many ever went into a big factory where it is woven? Take the print or cambric, for instance, from which your shirt-waists or dresses are made. It has to go through a multitude of processes before it gets from the cotton, as it is picked and bought by the great cotton factories, to be the pretty printed cloth you see. The first thing they do, in a great cotton factory, is to spin the cotton into thread for warp and woof, or “filling,” as the latter is sometimes called. Possibly some of you may have seen your grandmother spin wool, or even weave the yarn into cloth. If so, you will understand better what has to be done. In a factory the cotton is passed through several machines, which pick it to pieces and throw out the seeds and other foreign substances. From each one of these machines it comes out a little finer than before, until, at last, it is fine enough to spin. The spinning is done in another room, on a machine called a “mule” or a “Jenny.” Then this fine thread is taken to another floor, and woven in the brisk and busy looms into unbleached cotton cloth. But it is not then ready for market. Even if it is to be sold as unbleached cloth, it has to go through the process of singeing. That is, it is passed over a big cylinder, close to a row of gas-jets, which scorch off the fuzzy lint which makes the cloth rough. This, of course, is a delicate operation, and after it, if the cloth is to be sold as brown sheeting, it is ready to be done up in great bales for the stores. If it is to become bleached cloth, however, it has to be passed through a solution of chloride of lime and other ingredients, and take several baths. This takes some time, but is a very necessary process, just the same. When it is over, the cloth is ready to be sold and made up into under-clothing, sheets, and pillow-cases. The most interesting thing about a big cotton-mill is the printing department. Every mill has its own designers. They have a pleasant room at the top of the building, with plenty of light, and they make their designs with water-colors. Of course one must be something of an artist to be a successful designer. One must also have very careful and exact training, as the designs have to fit perfectly the cylinders upon which the cloth is printed. The variation of a design one hair’s breadth from the requirements of the cylinder renders it useless. Colors must be prepared from dyestuffs in immense vats, to color prints which do not have a light background. Then dyes must be prepared to match every tint in the design. Copper sheets are also stamped with the design, and fastened upon great cylinders in such a way that, when the cloth is pulled through, the figures are printed upon the cloth like the original designs. Sometimes the cloth has to go through this process many times, in order to receive all the colors necessary to the pattern. After it is printed, the cloth is ready to be measured off into “cuts” of forty or fifty yards, and packed into boxes for the wholesale dealers. Even then it has to pass through several hands before you ever see it. What should you say if I were to tell you that it has probably taken over a hundred people to make your shirt-waist, my boy; or that all those hundred people worked for days to make your print apron, my girl? If ever you get an opportunity to go through a great cotton-mill, from the engine up through to the designer’s room (where, by the way, very few people are admitted), don’t refuse it.—The Interior.