SOME USES OF STEEL AND IRON

10%

S. D. A. Publishing Association · Battle Creek, Mich. · Aug 28, 1889

FromThe Youth’s Instructor, Vol. 37, No. 35.

Read the full edition

SOME USES OF STEEL AND IRON.

THE engraving on this page shows the famous works of Herr Krupp, which are located at Essen, in Rhenish Prussia. This is where the celebrated German cannons are made; also axles, tires, wheels, springs, engines, and numerous other useful articles. It is said that nine thousand men are employed in these works, which cover one hundred and eighty acres of land. It is no wonder locomotives are seen flying about the grounds in every direction, and that various telegraph stations are found in the buildings, by means of which each department may readily communicate with the outside world.
Round about this hive of industry are several pretty villages where workmen's families live, and where their children may attend school. The men themselves toil from early morn till late at night amid the ceaseless din and clatter of forges and blasting furnaces, and retire to their homes in the villages only when the weary labor of the day is done.
In one department of these iron works is a large steam hammer, capable of giving a stroke equal to the weight of one thousand tons. When one of the large cannons is to be forged, a huge mass of steel, from twenty to thirty feet long, heated to a white heat, and weighing perhaps thirty tons, is drawn from the furnace by a steam engine, and placed where the blows of the giant hammer fall on it. When the mass is pounded enough for the time, it is easily moved, or turned into another position by means of chains, which are connected with the steam engine.
When the proper shape has been given to the metal by the hammer, it is removed to another apartment, where it is placed in a mammoth turning lathe. Here the outside of the long mass of steel is shaved off, apparently as easily as though it were only a log of wood, making the steel look like polished silver. It is then taken to a powerful machine which bores out the center of the solid metal.
But there is still another process before the gun becomes “rifled.” This is done by cutting a number of grooves in a spiral direction on the inside of the gun, from one end to the other. These grooves are for the purpose of making the cannon ball, which is supposed to fit nicely in the gun, fly out with a rapidly revolving motion, which not only insures greater accuracy in shooting, but gives it more force in its destructive work.
These monster guns are made of the finest steel. If, in the process of making, the slightest flaw is observed in the metal, it is immediately discarded as unfit for the purpose. In some cases, even, these perfect guns are solidly wrapped in heavy steel coils to make them proof against bursting when under the sudden strain of a heavy charge of powder. Poorer kinds of steel are used for other purposes, such as the manufacture of steam-car rails.
One of the most important uses to which iron is put is that of making anchors,—
“Whose giant hand Will reach down and grapple with the land. And, immovable and fast, Hold the great ship against the bellowing blast.”
These are made of what is called “scrap iron.” The pieces of iron are beaten together into a large, solid slab, when it is placed under the heavy steam hammer, to be forged into the proper shape, and is then finished by hand. This is very heavy work, when the anchor is a large one, as the intense heat from it is hard to bear. Indeed, a man can remain by it only long enough to strike one or two blows with his sledge hammer, before he retires, for another workman to follow him, who in turn gives way for another. After the anchor is finished, it is sometimes tested by hydraulic power, to be sure it is strong enough to hold the ship for which it was made. One anchor made for the steamer Great Eastern weighed eight tons. J. O. C.