SALMON CANNING

9%

S. D. A. Publishing Association · Battle Creek, Mich. · Nov 6, 1889

FromThe Youth’s Instructor, Vol. 37, No. 45.

Read the full edition

SALMON CANNING.

ALONG the south line of Washington Territory runs the great Columbia River. One of the industries of this region of country is the catching and canning of those huge fish called salmon, that frequent this river at certain seasons of the year. As few of the INSTRUCTOR readers have ever seen the process of canning performed, and as it is interesting to read about, though not so interesting to see done, a description will be attempted. At various points along the river are establishments devoted entirely to the business of canning salmon. The fishermen who bring the monster fish to the wharves are white men, but all the handling and the work is done afterwards by Chinese. The fish weigh from five to forty pounds, and are piled on the dock by the fishermen in regular piles. Then come the Chinamen and re-assort them according to the calls from the factory, or as strikes their fancy. The hands are not used in doing this part of the work, but a stick, with a sharp spike in the end, is employed. By a quick thrust of the spike into the head of a fish, and a peculiar turn of the wrist, a fish is thrown from one pile on to another with ease and exactness.
The first glance into an establishment of this kind is an uninviting one, and one that leads the gazer, if not blessed with a very strong stomach, to mentally resolve never again to taste of the canned article. By the side of several long benches stand Chinamen, with long knives in their hands, which they often sharpen on the steels fastened by a chain around the waist.
At the first table, as you enter, stands a Chinaman laying the fish side by side, as they are brought in, and with their heads all one way. When his table is filled, an operator steps forward, and with more or less skill, according to his experience, cuts off the heads and front fins. Some of the men exhibit marvelous dexterity in this portion of the work. The fish, freed from their heads and front fins, are taken charge of by another man, who, with two quick movements, removes the tail and back fins; one single long cut, and the fish is laid open its entire length; a fourth movement, and the entrails are all removed and laid to one side.
The fish, minus their heads, tails, fins, and entrails, are then thrown into vats of clear water, and are well rinsed and scraped. As salmon have no scales, this part of fish-cleaning is saved. The workmen are very particular at this stage of the process, to their credit be it said, and remove everything offensive; yet by the time the visitor has penetrated thus far into the establishment, he finds the dirt and stench almost unendurable.
From the vats the fish are sent to the “chopper,” a long table having slots throughout its entire length and about two inches apart, into which curved knives play, worked by a lever. The fish are laid evenly upon this table, and the knives cut them into sections just two inches wide. These sections are then subdivided by hand into pieces small enough to pass into the cans, into which the fish are now ready to be placed.
These cans are made in a separate room by other Chinamen. Two dozen are arranged on the “salting-table” at one time. Over them is placed a salting-board,—a board with two dozen auger holes bored into it. Under these holes a thin board is placed, and then the holes are filled by throwing salt upon the upper board and scraping off the surplus after the holes are filled. A can is directly under each hole, and when the under board is withdrawn, each one receives a measured quantity of salt, generally about a teaspoonful.
The cans are next carried to a table piled up with chopped fish, and the fish packed into them as solidly as it is possible to do. There is no danger of being cheated in quantity; for every effort is made to have the can packed full in the beginning, so that, after cooking, it may be reasonably full. All inequalities at the top are then neatly pared off with a knife, the tops are put on, and the cans run through a soldering machine. From this machine they go to another table, where the little holes in the covers are closed by hand. From this time on, the cans are continually tested for flaws, to prevent the possibility of sending out any imperfect ones.
Now comes the cooking. A large, square iron tray is lowered to the table by means of a rope which passes over a pulley, and about one hundred cans placed upon it. The tray is then lowered into a vat of boiling water, and allowed to remain two hours. It is then raised and placed again on the table, and a man strikes each can with a wooden mallet, to ascertain if all are sound. He throws the faulty ones to one side to be fixed up. This man is an expert at his work. He strikes the blows so rapidly that the eye cannot follow the motion, yet his ear is so exquisitely trained, by long practice, that he never errs, but will detect a fault instantly. Behind him follows a man with a mallet that contains a small awl. He strikes each can with this mallet, and the awl makes a small hole through which the gas escapes. Often when this is done, the gas and fluid will spurt up two or three feet in hight. It is not, therefore, very safe to be too close to the man as he does this part of the work.
The little hole is then soldered up, and the cans are carried to the “retort,” where the heat is kept steadily at twenty-eight degrees above the boiling point. They remain in this retort for another two hours, and that finishes the cooking. On being removed, they are again tested, and then passed to the “cooling-room.” When perfectly cool, they receive another test, and are then lacquered or varnished. This is done by dipping a brush into brown varnish and rubbing the cans one by one with it. They are then placed on slats, and allowed to drain the surplus into trays. When dry, they are tested once more, labeled, and packed into boxes containing four dozen cans, and so shipped.
W. S. C.