A few years ago there was a craze for photographs having a glossy surface. Photographers reaped a rich harvest from the extra prices charged for the showy but inartistic “aristo” prints. But the fad was short-lived; and now the glossy gelatin and collodion papers are used by professionals only in making prints for reproduction in half-tone, and for their cheapest grade of portrait work.
When the reaction set in, some photographers went back to albumen paper; others took up platinotype, or other of the more troublesome processes, until matt-surface print-out paper began to appear on the market.
The matt-surface paper can hardly be called a fad. It is simply a process by which the old-fashioned pictures may be obtained with less trouble and uncertainty than by the old methods. Of course there is some difference between the pictures printed on modern matt-surface paper and those printed on plain silvered paper, such as was used by the early experimenters in the photographic art. But few artists will admit that the difference is favorable to the modern method. There is no silver-printing process that possesses such pictorial possibilities as the old plain silvered paper.
The process is neither difficult nor expensive. Its one great drawback is that the paper will not keep. It should be sensitized, printed, and toned the same day. It may, however, be sensitized in the evening, and hung up to dry during the night, to be printed and toned next day. If you arrange everything conveniently for sensitizing, this will not be as troublesome as it sounds to tell it.
What was said about paper to be used for the blue-print process applies with equal force to that sensitized in the silver bath. Photographic paper is best, but any kind will do.
Before sensitizing, the paper should be “salted.” I will give several formulas for salting, and you can take your choice:—
Gloss starch, ¼ ounce Chloride of sodium, ¼ ounce Water (boiling), 24 ounces
Dissolve the starch in a little cold water, and add it to the boiling water. When clear, add the salt, and allow the solution to cool before using.
Water, 24 ounces White gelatin, ¼ ounce Chloride of sodium, ¼ ounce
Soak the gelatin in the water until it is soft; then dissolve it by heating the water. Add the salt. When cool, the solution is ready for use.
Neither of these solutions will keep more than two or three days, but both are quite simple. Here is another that is better, though more complicated:—
Boiling water, 12 ounces Chloride of sodium, 1 ounce Acetic acid, 3 ounces Arrowroot, 1 ounce
Dissolve the arrowroot in a little cold water, and add to the boiling water. When clear, add the salt and the acid, and one ounce of tannin that has been previously dissolved in twelve ounces of water.
In any of these baths the paper should be soaked about ten minutes. It may then be hung up to dry. As it keeps indefinitely, a large amount of paper may be salted at one time, and it will then be ready to sensitize when needed.
There are many different formulas for silver baths; but the indispensable condition of success with any of them is purity of water. Distilled water is of course best. Rain-water stands next; but where it falls in the vicinity of large cities, it will often gather so many impurities from the air as to ruin a silver bath. The water from some wells is so nearly pure that it may be used with safety. Get the best water you can, and mix the bath according to one of the formulas given. If it looks turbid, or if it gives spotted or streaky prints, pour it into a glass jar or bottle, and set it in the sun for a few days. Then decant it, throwing away the sediment, and you will not be likely to have any more trouble.
Water, 10 ounces Silver nitrate, 1 ounce Nitric acid, 6 drops
In this bath the paper should be floated three minutes.
Water, 8 ounces Citric acid, ¼ ounce Silver nitrate, 1½ ounces
The paper may be floated in this bath, or the surface may be swabbed with the solution, as recommended for sensitizing blue-prints. But do not use the same swab for both processes. The slightest trace of foreign chemicals in the silver bath is fatal to success. After using a swab in this bath, it must be thoroughly washed, or the acid will play havoc with the fabric of which the swab is composed. After sensitizing, the paper must be dried in the dark; then it is ready to print.
Print quite deeply, as this paper tones out more than the commercial print-out paper.
This paper can not be toned in a combined bath. Almost any single-bath formula will do; but I prefer the acetate bath, a formula for which was given in a former paper. The toning is carried on just the same as with gelatin paper, but the fixing-bath requires no hardener. One ounce of hypo., dissolved in six ounces of water, will fix the paper in about fifteen minutes. After fixing, it is washed like any other paper.
Some surprisingly beautiful effects may be obtained by using these formulas for printing on silk. No additional instruction will be needed, except that if the silk is new, it should be thoroughly washed in hot soap-suds before sensitizing. Thin China silk, such as is used in making handkerchiefs, is best for this purpose.
When you use a silver bath, you need not be surprised at seeing brown stains on your fingers. They may be removed by washing in a solution of cyanide of potassium,—but remember that cyanide of potassium is a deadly poison.
J. EDGAR ROSS.