AdventAI

PLATES AND DEVELOPER

By J. Edgar Ross

From The Youth’s Instructor, Vol. 48, No. 13., March 29, 1900

Now if you are supplied with the necessary tools, the next step will be the selection of materials. Perhaps it will be well to speak of these in the order in which they will be used.

First in the list come dry plates. There are very few manufacturers of dry plates who are recognized as leaders in their line. Plates made by them are called “standard” plates, and are sold at a “standard” price. In some places standard plates are the only ones obtainable. Dealers often allow a small discount on these plates, but at best the price is exorbitant. Plates other than standard are usually sold at from thirty to forty per cent discount, though they are quoted at the standard price. I have found, from a rather extensive experience, that the principal difference in these plates is in the price. Some plates may be, and for some kinds of work undoubtedly are, better than others; but they are all good, and if properly handled, will all yield excellent results. If economy is not a necessity with them, I hope my readers will look upon it as a duty, and choose some make of the cheaper plates if they can be obtained in their locality. Do not change about from one brand of plates to another. Even experienced photographers usually have trouble when they begin to use a new brand of plates. Each kind has peculiarities with which one must become familiar before he can expect the best results. Stick to one brand of plates until you become thoroughly familiar with them; by that time you will have no desire to change.

After the plates have been exposed, you will need chemicals with which to develop them. In all photographic stock houses, many kinds of developers that may be used by simply diluting with water, are kept in stock. In addition to these developing solutions there are an almost infinite variety of ready mixed developing “powders,” which require only to be dissolved in a given amount of water before they are used. All these developers are convenient, and some are excellent; but they are all expensive. That brings us back to our duty as stewards of the Lord’s goods.

With every box of plates the manufacturer incloses several different developing formulas that he recommends for use with his plates. Most of these give the preference to pyro.; and for professional photographers, who do a great deal of developing, and have no objection to stained fingers, pyro. is an excellent developer. But it is the one developer that I should advise beginners and amateurs generally not to use.p. 99

Second to pyro., eikonogen or hydrochinon, or a combination of the two, is recommended. If you decide to use any of these developing agents, you can mix them according to the formula of your plate-maker; or if you prefer to try it, you will find the following formula an excellent one for use with any kind of plates:—

Ingredient Amount
Hot water, 2 quarts
Sulphite soda, 6 ounces
Hydrochinon, ½ ounce
Eikonogen, 1 ounce

Dissolve these in the order named; and when cool, place in small bottles, and keep tightly corked. Most developers decompose rapidly when exposed to the air; but if the foregoing simple directions are followed, this one will keep indefinitely. Of course if you use a great deal of developer each day, it may be placed in one large bottle; but by keeping it in small bottles, the contents of one may be entirely used up before another is uncorked. These bottles should all be labeled “Developer A.”

For the other solution mix:—

Ingredient Amount
Hot water, 1 quart
Carbonate of soda (sal soda), 8 ounces

This may be kept in one large bottle, as it will not decompose by exposure to the air. It should be marked “Developer B.” For use, two parts of A and one part of B are mixed.

Every photographer has his favorite developer. I must confess that I have quite a number of favorites,—one for each kind of work. For portraits I prefer the one I have just recommended; for landscapes, another; for lantern slides, a third; and for bromide paper, a different one still. There are many developing agents, and each has some peculiarities that make it especially suitable for certain kinds of work.

A combination of metol and hydrochinon comes nearer being a “universal” developer than any other I have ever used. With slight variations it may be used for any of the developing processes that will be described in this series of articles. We will, therefore, call it our “standard” developer:—

Ingredient Amount
Water, 80 ounces
Metol, ⅛ ounce
Sulphite soda, 4 ounces
Hydrochinon, ½ ounce
Sal soda, 6 ounces

Keep this in small bottles filled to the neck, and tightly corked. It should be labeled “Metol-Hydro. Developer—2 to 3.” The “2 to 3” is the proportion of developer and water to use in developing a correctly exposed plate,—two parts of developer to three parts of water. The proportions to use for other classes of work will be given in due time.

When the plates have been developed, they must be “fixed,” or made permanent, by removing all the free silver. This is accomplished by immersing them in a solution of hyposulphite of soda (“hypo.”), two ounces to eight ounces of water. This solution will keep; but hypo. costs only five cents a pound, and it works so much better when fresh that I advise my readers to mix it only for immediate use.

J. EDGAR ROSS.