PANORAMIC PICTURES

9%

Review and Herald Publishing Company · Battle Creek, Mich. · Aug 2, 1900

FromThe Youth’s Instructor, Vol. 48, No. 31.

Read the full edition

PANORAMIC PICTURES

Last Paper

You may sometime wish to take a picture including a greater angle than your lens covers. To accomplish this, it will be necessary to take two or more negatives, and join the prints, either by vignetting them, and printing on one piece of paper, or by mounting the separate prints together. The first method is the more satisfactory, as it gives a continuous print, like that taken by a regular panoramic camera; but a special printing-frame is required, and the process is a somewhat complicated one for a beginner. I will therefore describe the more simple method.
Set up your tripod in the desired position, and be sure that it is perfectly level. The camera must not be tilted either up or down. If necessary to raise or lower the position of the image on the ground-glass, it must be done with the rising and falling front.
Before making the first exposure, it is best to rotate the camera to the different positions to see how many negatives will be needed, and what will be included in each. You must think of all the different pictures as one, in order to see what objects should be included in the first.
Make the first exposure in the ordinary manner, and remove the plate-holder. Now notice some object about three fourths of an inch from that end of the ground-glass where the remainder of the picture lies. Loosen the tripod screw, and rotate the camera until that object is about the same distance from the other end of the ground-glass. This will make the same objects in the view occupy about three fourths of an inch at one end of each negative. As the prints must be joined in this space, it should be in that part of the view that is of the least possible importance.
If more than two negatives are needed, it will only be necessary to repeat the operation as for the second, until the desired view is secured. The plates must of course be given an equal exposure; and as the light is constantly changing, they should be taken as soon after one another as possible.
It is best to develop all the negatives of a series at one time, and in one tray, as they will then be sure to be of equal density. But if you have no tray large enough to hold all the plates at one time, be careful to develop all as nearly alike as possible, and you will have no trouble about the printing.
Make prints the full size of the negatives, and be sure to print all equally dense. They may be trimmed either before or after toning; but as most paper has a tendency to curl after it is toned and dried, it is better to trim them first.
The ends that are to be matched may be trimmed by cutting through the same objects in each print separately. A better way is to overlap the parts that contain the same objects, and match them accurately. This can be readily done by holding them between you and the light. They may then be trimmed together, with one cut of a knife drawn along the edge of a ruler. After toning, they should be mounted side by side on one piece of cardboard; and, except for the scar of the trimming-knife, they will look like one picture.
J. EDGAR ROSS.