AdventAI

A BEATING INDUSTRY

By T. A. Kilgore

From The Youth’s Instructor, Vol. 47, No. 39., October 5, 1899

At the corner of West Broadway and Spring Street, New York City, there is a firm that literally makes money by beating. One might think there was nothing peculiar or strange about that; for perhaps within the knowledge of many of our readers there are a number of firms that seem inclined to make money by “beating.” The peculiarity of these people is that they hire respectable-looking men, and pay them well, for no other purpose than to beat for them; and they don’t seem to care who knows it.

By courtesy of the manager of this firm of beaters, the writer was permitted to visit the place, and learn some of their methods. He must say that he never before saw, in so small a compass, so many “beats;” but it must also be confessed that the lively bustle and air of thorough business that surround their corner impress one with the idea that they are anything but “dead-beats.”

Reference is made to the W. H. Kemp Company, which is, we believe, the largest gold-beating establishment in this country, and perhaps the largest in the world.

Doubtless there are many who do not realize that the gilt on the edges, and stamps on the covers, of books; on the lettering on signs on glass and boards; on picture-frames and moldings; and on nearly everything looking like gold, indoors and out, is almost pure gold: and few understand just how the gold-leaf is made with which this gilding is done.

The pure gold is purchased in “bricks” from the United States assay office. Upon being melted, it is alloyed with silver and copper to twenty-two and one-half carats’ fineness. Pure gold is twenty-four carats fine; and a simple calculation shows that the material from which the gold-leaf is made is fifteen sixteenths pure gold. That is finer than our gold coin, which is but eighteen carats fine.

To melt the gold, it is put into a stoneware jar called a crucible, and placed in a furnace capable of being heated very hot. When melted, the gold is run into bars, or slugs, called ingots, about six inches long, an inch and a quarter wide, and one fourth of an inch thick, weighing from twenty to thirty ounces. These ingots are taken to a powerful rolling-machine, of which this firm has two, and rolled out into a ribbon an inch and a quarter wide, and so thin that were a thousand of them laid one upon another, the pile would be but one inch high.

A piece of this gold ribbon weighing fifty-six pennyweights, and worth just fifty-six dollars, is cut off and handed to a beater, whose account is charged with the amount. He first anneals the gold by rolling the ribbon up in a roll, and putting it in the fire till it is red-hot. When cooled, it is soft and easily worked. He then cuts the strip into pieces as long as it is wide, making about two hundred and ten tiny squares. These little pieces are laid singly between sheets of a specially prepared paper cut three and one-half inches square, which are made into a firm package called a “cutch.” This cutch is then beaten until the pieces of gold are spread out as large as the sheets of paper. The pack is then opened, and each of the gold sheets is cut into four square pieces. These pieces are laid between other, but still more carefully prepared, sheets of paper, a little larger than those in the cutch, which form another pack, with about eight hundred and forty leaves and sheets, called a “shoder.” The shoder is then beaten until the little gold pieces are expanded to the full size of the sheets between which they are laid. The package is then opened, and the sheets of gold are once more cut into quarters. This time each quarter is placed between two sheets four inches square, a thousand of which make a package called a “form.” The sheets of which this form is composed are of a material called “bull’s bung.” It is really the intestines of the ox, prepared especially for this purpose.p. 494

In this business, as in some others, the condition of the weather has much to do. Dry weather is best. Dampness is detrimental to the work.

All sheets between which the gold is beaten must be carefully kept. Those in the cutch and shoder are pressed and thoroughly dried each time after being used, being placed in a small press previously heated in a furnace kept hot for that purpose. The sheets of the form are not only kept smooth and dry; but each time after being used, they are cleansed by being rubbed on both sides with a preparation of chalk, applied with a brush. Everything, in fact, in which the gold is worked—such as the crucibles, which are used but a single time and thrown aside; the sheets of the various packs, etc., after having outlived their usefulness—is, with the sweepings from the floor, preserved and turned over to the assay office, which has the happy faculty of extracting every particle of the precious metal that may be lurking within.

There is more or less waste, as some of the leaves in the pack are not perfect, and must be thrown among the scraps; so the good leaves in one shoder, cut in quarters, will usually fill three forms of one thousand leaves each. The beating of these forms is the last act in that process, and requires, if possible, more scientific work than is necessary for either the cutch or the shoder.

The hammers used are of cast-iron, with large, rounded faces, and vary in weight from seven to ten pounds. The handles are short. The anvil upon which the pack is placed to be struck is a solid block of granite. This is used in preference to iron or steel, as it is more elastic, and the hammer rebounds from it more easily, thereby making easier the work of the beater. But one hand is used to swing the hammer, while with the other the pack is turned around or over at every stroke. The men who do this work become ambidextrous.

When the forms are beaten sufficiently, they are taken to another department, where they are opened, and the gold leaves put into books of twenty-five leaves each. This work is done by a number of young women, who handle these delicate sheets of gold with surprising ease. The full-sized gold-leaf is caught up and laid out on a “pallet” with a pair of large wooden tweezers, somewhat resembling a pair of Chinese chop-sticks. A gage of bamboo,—the best material known for the purpose,—which has two cutting edges set, for ordinary work, three and one-half inches apart, is then taken up; and with two skilful movements the leaf is cut to exact size and accurately square. Again it is picked up with the tweezers, and this time placed between the leaves in the book, when it is ready for the market. So light and soft is the metal leaf, that, should wrinkles occur in it, they are quickly smoothed out with a gentle puff of the breath.

When the three forms are emptied, and the books filled, all the scraps from that beating are collected, and melted into a “button.” The books are counted, each one having a fixed value. The beater is credited with the value of the books and button; and if the amount is just fifty-six dollars, his account balances. If it amounts to more or less than that sum, he makes or loses the difference.

At the close of each day, all the unfinished work of each man is put into a tin box, and placed in one of five enormous safes, which are thoroughly fire-proof and equipped with a most complete burglar-alarm. In these safes is stored gold and silver bullion, together with all the gold-, silver-, and aluminum-leaf on hand. This is usually no small amount, as this firm makes and handles all kinds of metal leaf, platers’ supplies, bronze powders, etc., in large quantities. T. A. KILGORE.