The so-called lead of our pencils is a mixture of what is known as German clay and graphite. Graphite is often called black-lead, although it is in no way related to lead. It is a form of carbon, and of the same family as coal. It is, however, an older member of the family, being found in granite rocks. The name lead was given to it because lead had formerly been used for marking on paper. The way in which these materials are made into pencils is described in the New York Sun:—
Do you see this fine black powder? It is graphite. It costs twenty-five cents a pound. This white substance is German clay. It is brought as ballast in sailing vessels. We mix the clay with the powder, and grind them in a mill, adding moisture, till the mixture becomes a paste like putty.
This paste is pressed into dies of the size of a pencil lead, but four times as long. Cut into proper lengths, the leads are baked at a high temperature. The degree of hardness is determined by the proportion of clay—the more clay the harder the lead.
The wood of the pencil is cedar. This is brought mostly from Florida, and is obtained from fallen trees. It is delivered in blocks sawed to pencil lengths. Half of these are thick to receive the lead, and half are thin to be glued upon the others when the lead has been inserted.
The blocks are wide enough for four pencils each. They are grooved for the leads by a saw. The leads are taken from hot glue, and laid in the grooves. Then the thin piece is glued to the thick one. After the blocks are dry, the four pencils of each block are cut apart. Another machine shapes them, making them eight-sided, three-sided, round, or flat, as may be desired. They are burnished by machinery, and are then ready to be tied up in bunches.
The higher grades of pencils are made by finer manipulation of the graphite and the use of better material. The average pencil costs about one quarter of a cent to make. Of this grade of pencil an operator will turn out twenty-five hundred in a day.