To watch the loading of grain either from an elevator or lighter into one of the mammoth vessels engaged in its transportation, is to witness one of the chief operations in the movements of the world’s commerce, says a writer in Donahoe’s Magazine. It is carried in long pipes, with a funnel-shaped, movable appendage at the end, which is shifted by means of a rope from one part of the hold to another, according as the stream of grain fills up the spaces. It rushes into the vessel with the velocity of a torrent, and sends a dense volume of dust and chaff upward, obscuring the depths beneath, and making the men attending the stowage below look like ghosts in the rising mist.
The “trimming” of the grain in the holds is an important part of its storage. After several thousand bushels have streamed into the hold, a dozen or more men are delegated to shovel the down-pouring column in between the vessel’s beams, a job for which they are paid at the rate of one cent a minute. In vessels of the Cunard stripe, it takes between twelve thousand and fifteen thousand bushels to fill a hold, and these vessels average fifty thousand bushels in the total cargo. Ships carrying grain alone can take as high as one hundred and twenty-five thousand bushels, and when it is considered that from four thousand to seven thousand bushels can be stored in an hour, every forty bushels weighing a ton, an idea can be had of the force of the torrent directed into the vessel.
Large vessels have four or five holds, and a distinction is made in storing the cargo in them. Grain, from its compact and dead weight, is reserved mostly for the center of the vessel, while cured provisions are packed as far forward and as far aft as possible, for their better preservation from the heat of the ship’s fires. In some vessels, like the great Cunarders, which carry passengers as well as freight, the heaviest weight is stored in the lowest hold; this is to steady the vessel, and is called in the technical parlance of the stevedore, “stiffening” the ship. It takes about fifteen hundred tons to “stiffen” a great Cunarder; and when this is done, the lower hold is fastened and battened down, and work is begun on the next. —Scientific American.