THERE are very few outdoor scenes that, when photographed, are not beautified by having a few clouds to break the monotony of the sky. A great expanse of clear, white sky has spoiled many an otherwise excellent landscape picture. Of course you can not always get appropriate clouds to occupy the desired position; and even when you do, it is not always possible to get them in the negative.
When the picture includes moving objects, thus demanding a rapid exposure, the securing of any clouds that may be in the sky is quite out of the question. The reason is not that clouds require a long exposure; for just the reverse is true. The violet rays so predominate in the sky that when the negative has been sufficiently exposed for the landscape, the sky has been so overtimed that it is made of universal blackness in the negative. It will then print perfectly white.
If the subject will admit of an exposure of two or three seconds, and there are appropriate clouds in the sky, the photograph may be taken through a color-screen or a ray-filter. This will exclude some of the violet rays, and thus equalize the exposure.
Under the most favorable circumstances, the sky will often be more dense than the landscape. When the contrast is not too marked, a little dodging in the printing will usually obviate this difficulty. The least dense portions of the negative will print most rapidly; and when they are fully printed, they must be protected until the denser parts are printed also. This may be accomplished by holding any opaque object over the part to be protected, moving it slightly every few seconds, to avoid a distinct line between the protected and exposed parts. If the protecting mask is held about half an inch from the back of the negative, and the printing is combined in the shade or under tissue-paper, it will not be necessary to move the mask, as the light will be so diffused that no line will appear. This is what is called “vignetting.”
When there are no clouds in the sky, they may be printed in from another negative, without great difficulty. The first thing necessary is to get a negative with clouds suitable for the landscape, and so lighted that they will not look as if they were taken at a different time of day than the rest of the picture. It is well to take a number of cloud-negatives that are differently lighted. Do not devote too many plates to heavy storm-clouds. They are interesting in themselves, but there are few landscapes into which they can be appropriately introduced. Light, fleecy, scattered clouds will be far more serviceable for double printing.
Do not print a favorite sky into too many pictures, as this will give your work a sameness that will be anything but pleasing. If the sky in your landscape prints white, a print may be made from it without masking. Take a piece of brown wrapping-paper about the size of your printing-frame, and cut through it along the sky-line of the negative. If the picture is of a level country, with no trees nor buildings extending above the horizon, this will be simply a straight cut. Under any circumstances it will not be difficult, as it will not be necessary exactly to follow the sky-line. Adjust this mask on the face of the printing-frame so that all but the sky of your landscape negative is covered, and fasten it in position with two tacks at each end. Unless you print in the shade, the remainder of the printing-frame must be covered with white tissue-paper.
The cloud-negative may now be placed in the frame, and the sky printed into your landscape. The mask will protect that part of the paper that has already been printed, while the tissue will admit sufficient light to print the clouds on the white sky.
If the sky of your landscape negative prints too dark for this, it may be necessary to mask it while printing the landscape, just as you mask the landscape while printing the sky.
J. EDGAR ROSS.