HOW CROCKS AND JARS ARE MADE.
STONEWARE is made of potter’s clay, which is of a bluish gray color, very heavy, free from grit, and found in many parts of the world. It is found in considerable quantities in Ohio, Western Pennsylvania, and Maryland. It is usually near the surface, just below the common yellow clay. A stratum of it ten or fifteen feet deep is not uncommon, and it is generally easily mined. Before it is ready for use, it has to be ground in a mill. Some mills have a combination of large knives and crushing wheels, and are run by steam power. When the grinding is completed, the clay is made into large square blocks, and placed in a cellar, where they will keep moist. From here it is taken as needed, and made into smaller balls, proportioned to the size of the crock or jar to be made. The “turner” takes one of these balls of clay, and places it firmly on the center of his “wheel,” a metal disk about eighteen inches in diameter, running horizontally, and worked with a foot-treadle. As the wheel revolves rapidly, he dextrously fashions the ball of clay into the desired shape. By passing a fine wire between the bottom of the jar and the surface of the wheel, they are separated, and the jar is gently lifted and set on a board. When the board is full of jars, it is taken to the drying-room, where a regular net-work of scaffolds holds up the boards full of ware. In a few days the ware is dry enough to glaze inside, and to decorate, or “blue,” as the workmen call it. This decoration is sometimes done by hand, with a camel’s hair brush, and also by the use of stencils, cut out of sweat cloth. The ware is now ready for the kiln, which is built of stone, and lined inside with bricks. It is about twelve or fifteen feet high, round, with arched or conical top. At the bottom are the flues, where the fire is placed. When the kiln is full of ware, the door is walled up, and a fire started underneath, which is gradually increased until the blaze comes out through the holes in the top of the kiln. This heat is intense; the “burning” lasts about three days. Then the fire is allowed to die, and in a few days the ware can be removed. The outside glazing on stoneware is accomplished by throwing salt into the kiln, just before the burning is completed. The inside glazing is a solution of “slip clay,” applied with a force-pump before the ware is burned.—Treasure Trove.