ORNAMENTING GLASS

50%

ORNAMENTING GLASS.

THE following is an example of the means of carrying out the inventor’s process: A coat of acid resist is laid upon the glass; from the parts forming the background to the design, the “resist” is removed with a stencil; soda and hydrofluoric acid are then poured upon the surface. Hydrofluoric acid is next applied; the resist is then removed, and the glass is cleaned. The glass is next coated with stain, and by means of a stencil, the ornament is freed from the stain, which remains as a protection from the background. The stain is then burned into the glass. The glass is then taken from the kiln, cleaned, and the required outline traced upon the glass, the background being filled with acid resist. The solution of soda and hydrofluoric acid is again poured on, so as to leave a white “mat” on the whole ornament, leaving the outline, which is protected by the resist, clear. The shading-in is then done, according to the ordinary process of the trade.—Scientific American.