AdventAI

SCREWS SMALL AS DUST.

From The Youth’s Instructor, Vol. 43, No. 3, January 17, 1895

An article in the Analyst contains a most interesting description of some of the wonders of watch-making:—

“The smallest screws in the world are made in a watch factory. There can be no doubting that assertion on any score. They are cut from steel wire by machine; but as the chips fall down from the knife, it looks as if the operation was simply cutting up the wire for fun.

“One thing is certain; no screws can be seen, and yet a screw is made every third operation.

“The fourth jewel-wheel screw is the next thing to being invisible, and to the naked eye it looks like dust. With a glass, however, it is seen to be a small screw, with two hundred and sixty threads to an inch, and with a very fine glass the threads may be seen very clearly.

“These little screws are four one-thousandths of an inch in diameter, and the heads are double in size. It is estimated that an ordinary lady’s thimble would hold one hundred thousand of these tiny screws.

“About one million of them are made a month, but no attempt is ever made to count them.

“In determining the number, one hundred of them are placed on a very delicate balance, and the number of the whole amount is determined by the weight of this. All of the small parts of the watch are counted in this way,—probably fifty out of the one hundred and twenty.

“After being cut, the screws are hardened and put in frames, about one hundred to the frame, heads up. This is done very rapidly, but entirely by sense of touch instead of sight, so that a blind man could do just as well as the owner of the sharpest eye.

“The heads are then polished in an automatic machine, ten thousand at a time.

“The plate on which they are polished is covered with oil and a grinding compound, and on this the machine moves them very rapidly by a reversing motion, until they are fully and perfectly polished.”