PRINTING AND TONING

10%

Review and Herald Publishing Company · Battle Creek, Mich. · Apr 26, 1900

FromThe Youth’s Instructor, Vol. XLVIII, No. 17

Read the full edition

PRINTING AND TONING

If your printing frame is larger than your negative, it will be necessary to fit it with a plain glass. Be careful to clean both sides of this glass, as well as the back of your negative, with a moistened cloth. The film side of the negative should be dusted with a camel's-hair brush or a soft, dry cloth. Any stains on the glass or specks of dust on the film will cut off the light, and make a white spot on your print. The manufacturers spare no pains to put up their paper free from dust; but to be on the safe side, it is well to dust that also.
The print must be quite a bit darker than the finished picture. Some toning baths tone out, or “bleach,” the prints more than others; so you must learn from experience how deep to print. Here is a good way to gain experience: Notice the time when your printing frame is first put out. Examine the print occasionally; and when it reaches the shade that you want the finished picture to be, notice the time again, and expose the print just one fifth of that time longer. If ten minutes have passed, give it two minutes more. If it has required fifteen minutes, let it print three minutes longer. If the prints turn out too light or too dark when they are finished, you can increase or diminish the proportionate time on the next ones.
Print-out paper need not be handled in the dark; but it should never be exposed to sunlight, nor for any length of time in an ordinary room. The prints need not be toned at once, but may be kept in a dark place until some convenient time. If the combined bath is used, it may be placed in either the hypo. or the miscellaneous tray; but if you ever expect to use a separate bath, keep the toning tray exclusively for that. Be careful to break any air-bells that may form on the film when the print is first immersed in the combined bath, or you may have spotted pictures. The toning should be carried to just the shade you wish to see in the finished picture. The prints should then be washed through twelve changes of water, allowing them to soak five minutes in each.
But I hope you will use a separate bath, so I will describe that process more in detail.
Fill the miscellaneous tray with water, and with one hand drop in the prints, one by one, while the other hand is used to immerse them. When the prints are all in, fill the toning tray with water also, and transfer them one by one to it. Pour off the first washing water, which will look quite milky, and replace it with fresh. The prints may then be returned to the miscellaneous tray, when they will be ready to tone. Of course if you have only two or three prints, it will not be necessary to change the washing water, but simply to allow them to soak about five minutes, keeping them in motion meanwhile.
I have already given formulas for toning baths, so they need not be repeated here. Enough of the bath should be used to cover the bottom of the tray at least a quarter of an inch deep. Take the prints from the water one at a time, and immerse them, face downward, in the toning bath. Do not try to tone too many at a time. Five or six are enough to begin with. They should be kept constantly in motion, either by rocking the tray or by moving them about with the hand.
The color of the prints will change slightly in the fixing bath; but you will soon learn how much change to expect. At first it will be well to tone some prints more deeply than others. Then when they are finished, you can tell which tone you like best, and tone the next lot accordingly. The depth of tone a picture should have is simply a matter of individual taste.
If you have only a small batch of prints, those toned first may be replaced in the water with the untoned ones. But if you have a large batch, it is best to have a separate vessel of water in which to keep them until all are toned. They should then be washed through three changes of water, when they will be ready for the fixing bath. Fifteen minutes is sufficient for fixing, and during the entire time the prints should be kept constantly in motion. After fixing, the prints must be washed through twelve changes of water. Then they will be ready to mount or dry.
If the pictures are to be preserved unmounted, a good way to dry them is to lay them face downward on a ferrotype plate, or, what is almost as good, a piece of table oilcloth. Cover them with a blotter or towel, and rub down with the hand, or roll with an ink-roller. This serves the double purpose of taking up the surplus water, and pressing the print into perfect contact with the ferrotype plate or oilcloth. Prints dried in this way have a glossy surface, and will remain flat; while if they are hung on a line to dry, they will curl up at the corners. If you intend to mount them at some future time, they may be hung on a line, or spread, face up, on a clean cloth or paper. Prints must be mounted while wet, and the preliminary soaking takes out all the curl they may have. J. EDGAR ROSS.