HOW WATCH JEWELS ARE MADE

10%

Review and Herald Publishing Company · Battle Creek, Mich. · Jan 24, 1901

FromThe Youth’s Instructor, Vol. 49, No. 4.

Read the full edition

HOW WATCH JEWELS ARE MADE

One day not long ago the writer had the pleasure of visiting one of Switzerland’s largest watch-jewel factories.
These “jewels” are made from rubies obtained, for the most part, from India, being sorted out from those stones fit to be polished as precious stones. They are dark-red and pinkish in color, the former being two or three times as valuable as the latter. A double handful of the cheapest rubies is worth from three to five hundred dollars, when the stones are in the rough; but when ready for shipment, they are worth three thousand dollars a pound. The stones are first sawed into tiny square slabs by an expert, who rejects all worthless pieces. The saw is a copper disc, armed with diamond dust. Diamond dust is valued at from twenty to thirty dollars a carat, the price having increased enormously since the Transvaal war.
The next operation is to polish the sides of those stones that have been cut, and grind them flat and even. This is performed quickly on the side of a whirling disc, moistened with a dark, creamy liquid containing diamond dust. After being polished, the stones are rinsed in water, and then sent to the machines that shape the jewels.
The operation of piercing a hole in a small jewel is one of extreme delicacy. The drill is diamond-pointed. It remains still, while the stone, imbedded in wax or shellac, revolves with great rapidity; the drill is thrust mechanically against it, piercing it slowly. Great care is necessary, that the drill pierce the stone at right angles to its surface. One worker at the time of my visit had to melt and remelt his wax several times, and try it with instruments of precision, before it was just right. The employer explained that the reason for this was that the man was somewhat excited because we were watching him so closely; usually he fixed a stone at one “heat.”
After this the stone is subjected to a turning process, whereby all the rough corners are knocked off, and it takes the form of a watch-jewel—flat on the back, with concave face, in the center of which an oil cavity is scooped out. It is then polished on the face and axis by being fixed to a rapidly revolving lathe, and ground smooth with very fine diamond dust.
When they have gone through these processes, the jewels shine with a luster that is almost wholly absent in the rough stones. They are then critically examined by experts, armed with lenses; and if the least inaccuracy is detected in a jewel, it is sent back to the maker for repair. If irreparable, it immediately loses its value, and is consigned to the “waste-box,” where it is utilized for various trinkets.
We saw two forms of rough diamond, also sapphires, which are used to make phonograph styles, compass points, etc. This factory makes many of the styles used by the Edison Phonograph Company.
As we saw a ruby in the rough increase tenfold in value under the skillful touch of the mechanic, we thought of the Master, who polishes the human soul, a living ruby in the rough, until the rough corners of unlovely habits are worn off. The diamond dust of the sword of the Spirit—the word of God—cuts its way into the hard and stony heart, and smooths the character until it comes forth from the process not only polished externally, but, like the ruby, the same all the way through,—sincere, faultless, ready for a place in the spiritual temple,—as ready to make peace in the church of Christ as the ruby is to diminish friction in the delicate axis of the watch.
P. A. DE FOREST.