AdventAI

How Linoleum is Made

From The Youth’s Instructor, Vol. 66, No. 24., June 11, 1918

HAVE you ever examined a piece of oilcloth or linoleum to discover its structure? Do you know of what it is made? Have you noted the difference in the coloring of the common floor oilcloth and the inlaid linoleum, and what forms the back of the heavy linoleums? If not, do so before reading this article. A few moments of objective study will reward your effort. Mr. Ralph H. Butz, in a recent Christian Endeavor World, tells the interesting story of the manufacture of linoleum, and answers many of the queries that will come to mind as one examines this much-used floor covering.

Materials Required to Make Linoleum

Mr. Butz says that “the greater part of the earth’s surface is covered to obtain the proper materials for this floor covering. One of the most important articles in this connection is flax, the seed of which is crushed to make linseed oil. Flax is imported from Russia, Argentina, and Canada. Linseed oil forms the base of all linoleum products. Cork is next in importance, and this is imported from Spain, Portugal, and Morocco. Burlap is required to start the process, and this burlap is woven in Scotland from jute that is raised in India. A certain grade of gums is required to mix with the rest of the materials, and these gums are gathered in Australia and Africa. The paints or pigments that are necessary to color the linoleum are manufactured in this country, but before the war began it was necessary to import them from France, Belgium, and Germany.”

How Oilcloth and Linoleum are Made

Oilcloth is a coarse canvas which has received a number of coats of thick oil paint, each coat being rubbed smooth with pumice stone before the application of the next. Its surface is ornamented with patterns painted in oil colors by means of wooden blocks. Since the colors are simply printed on the surface, they in time wear off. In the best linoleums the colors extend throughout the material.

In the proportion that linoleum is superior to the common oilcloth as a covering, is the process of its manufacture more complicated and more interesting.

“In making linoleum linseed oil must be oxidized. The oil is exposed to the air, and absorbs oxygen, which gradually changes it from a liquid to a tough, rubbery substance. The oil is boiled before the process is started.

“The best-known process of exposing the oil to the air is to hang long sheets of cotton cloth to the top of a high building or shed, which may be from sixty to eighty feet from floor to ceiling. Day after day these sheets are then flooded automatically and regularly with the boiled linseed oil, which, as it trickles down, leaves a thin deposit, and imprisons minute quantities of air.

This process is continued until the sheets grow into ‘skins’ about three fourths of an inch thick, which requires several weeks of continual flooding. After they have reached the required thickness, they are taken down and cut into pieces. Then these pieces are put through chopping machines and mixing machines where they are ground into very fine particles. Then cork is pulverized and placed in the mixing-machine with the oxidized linseed oil. The pigment to make the desired color is also added.

“After these materials have been thoroughly mixed, they are taken out of the machine in a stiff, tenacious mass, which is then applied to the long sheets of burlap forming the back of linoleum. In the making of plain linoleum this compound is applied by a heavy rolling machine, which presses it on the burlap very evenly. After it is properly pressed, it must be ‘cured.’ This curing is done by placing it in a large oven specially designed for the purpose, and in which the temperature is constantly maintained at 140° F. After it has been in the oven or heater for several weeks it is ready for marketing.

“The best grade of linoleum is inlaid, the manufacture requiring a more elaborate and intricate process. The colors in inlaid linoleum run through to the burlap on which it is pressed, and last through the life of the goods. In the making of inlaid linoleum the varicolored compositions are fed into the inlaying machine in the form of sheets which have already been rolled out. Each color has its own dies, and these punch out the pieces and press them on to the burlap.

“After the inlaying machine has pressed these small blocks on to the burlap, the burlap is taken to the hydraulic press, where it is twice put under a pressure of 400,000 pounds to the square foot. This great pressure squeezes the stamped-out tiles and burlap into a single material that does not show a seam or a joint.

Where Used

“Linoleum is used not only in houses, but heavy linoleums are used on the decks of huge battleships. In our modern skyscrapers linoleum is cemented directly to the concrete floor. It is used for the tops of desks and tables and other metal furniture, and for a great many other purposes.”

Lincrusta-Walton is a “material similar to linoleum, which is stamped out in embossed patterns and used as a covering for walls.”

When Discovered

The Encyclopedia Britannica says that Michael Nairn, of Scotland, was the first person to conceive the notion of utilizing the fiber of cork and oil paint in such a way as to produce a floor covering more lasting than carpet and yet capable of taking a pattern. This was in 1847. Mr. Nairn is also responsible for the linoleum business, though a Mr. Walton took out a patent in 1860 for linoleum.