AdventAI

W. S. CHAPMAN

By W. S. Chapman

From The Youth’s Instructor, Vol. 66, No. 2., January 8, 1918

How to Make Things — No. 1

W. S. CHAPMAN

These articles are written especially for the boys who are constantly “tinkering,” that is, trying to make things or to study out things already made. It is not designed to give them simply working models or many specific drawings from which they can construct articles. The idea is to so familiarize them with the use of tools as to make them competent to construct properly whatever their brains may brood over.

So, then, the effort will be to start the reader to doing some practical thinking, to help him to learn how to properly handle tools and to understand how to work, so that when he undertakes a task he may know beforehand how to accomplish it. In short, to have him develop into a handy boy to have around the house, competent to handle almost anything in the way of repair, or to originate almost any household article needed. This is the aim and hope in presenting these simple elementary principles in carpentry.

If you can make the acquaintance of some good-natured dealer in hardware, or of a clerk, and tell him of your desire to become handy in handling tools, and that, as your means will allow, you propose to collect a practical set of carpenter’s tools, one or two at a time, maybe, then ask him if he will allow you to call occasionally and look at tools and ask questions. Make the acquaintance also of one or more carpenters whom you can question. This will be of the greatest assistance to you, and the practical instruction these men can give will aid your advancement in carpentry as nothing else could do. Be careful not to annoy them. Especially keep away when they are busy. Show them that you appreciate their kindness, and they will take pleasure in instructing you. Talk with old wood choppers and men who, as boys, learned to split kindlings. You will be surprised at the amount of useful information you can obtain, all interesting and valuable, coming in very handy sometimes when the knowledge of how to do is wanted.

BOYS LIKE THE WORKBENCH, AND ALL IT STANDS FOR
BOYS LIKE THE WORKBENCH, AND ALL IT STANDS FOR

Hammers

Do you know how to pick up a hammer? “That is simple enough,” you say. Is it? Ask a blacksmith if he can tell a good workman by the way he picks up his hammer. Remember his answer.

Does a carpenter handle his hammer differently in driving a twentypenny spike and in sending “home” a fourpenny nail?

Why does a carpenter spit into the palm of his hand when he has a hard blow to strike, while a blacksmith uses a dry palm no matter how hard the blow?

Do not wait for me to answer these queries, but ask questions of carpenters, as you have opportunity, and then practice at home what you learn from their answers. Examine hammer handles. Note the difference between the hammer of the carpenter and that of the blacksmith; the hammer of the ten-cent store and the finished article sold by the hardware dealer. Note also the difference between the turned, the sawed, and the shaved handles, and ask the dealer for an explanation. Examine critically machine-made handles for axes. Note the different shapes and sizes and the “set” of the handle in the head of the ax. Ask for reasons, and when you at last come to the conclusion that you are competent to select the hammer that suits you, buy it and a medium-sized “nail set” with it, and you will be ready for your first lesson. The hammer is the most important tool in the carpenter’s chest, and a poor one is dear at any price, being always a source of trouble and vexation. Do not be too economical in the selection of tools. Wait until you have money enough to buy first-class ones. It will pay to be patient.

Nails

It will pay any boy to learn to drive nails properly. Some may reply, “Why, any one can drive a nail!” Perhaps these will be surprised when told that there are lifelong carpenters who never learned to drive a nail correctly. It was so simple a thing that they never thought it worth while to study over it, yet that spirit of carelessness crept through all their work and made them unreliable, and so retarded their advancement. They remain simply carpenters all their lives.

Watch your sister hammer a tack into the carpet. Notice that she slips the index finger over the handle of the hammer. “Why, what difference does it make where the fingers go?” Try it, first with the index finger on the top of the hammer handle and then with the whole hand gripping the handle. Which gives the more effective stroke? Talk to a carpenter about it. If you ever get into a tight corner where you will be called upon to handle your hammer in some odd positions, this knowledge will come in handy as a guide to what to do.

Kinds and Use of Nails

There are very many sorts of nails, but the principal one is the common or wire nail. Another is the flat-sided iron nail with a small head. This is called the “finishing” nail, because it is intended for use where it is to be driven wholly into the wood, head and all out of sight. These are made of the same sizes as the common or round nail, and there are still smaller ones called “brads,” used in thin woods. All finishing nails have two flat sides. They must be driven with the flat side parallel with the grain of the wood. Do you know what the “grain of the wood” means? Ask your father.

A finishing nail should be driven into the wood up to the head. Then, with a “nail set” placed upon the top of the head, with two or three quick, sharp blows, drive the nail “home” so that the head sinks below the surface. The trick is to do this without allowing the “nail set” to slip off the nail, or the wood will be smashed where the set strikes the wood, as finishingp. 8 nails are used in particular work where such a blemish is to be regretted. To guard against this accident, when the set is placed upon the top of the nail, lay it against the four fingers and hold it there with the thumb, resting the little finger on the wood.

Nails are sold by the pound, and this must be borne in mind in purchasing, as there will be more small nails to the pound than of the larger sizes. The manufacturers regulate the thickness of the nails according to their length, so that a carpenter has to attend only to the length of nails, all else being arranged by the factories. The length of nails is denoted by the word “penny”—twopenny, threepenny, fourpenny. These numbers run up to tenpenny in regular order consecutively, the smallest being one inch long and the others increasing by quarter inches up to tenpenny, which is three inches in length. Next is the twelvepenny, three and a quarter inches long, and the sixteenpenny, three and a half inches long. The next size is twentypenny, and from this on the numbers jump ten at a time—20d, 30d, 40d, 50d, and 60d, increasing one-half inch at a time. These are called “spikes,” the sixtypenny being six inches long, and large, of course, in proportion.

So far this is presenting to you simply the theory of carpentry, that is, the how to do, but it cannot be a reality to you until you put into practice what is suggested. Suppose therefore you now arrange to take your first lesson, provided you have the hammer and the nail set. Now purchase a small quantity of nails, both common and finishing—three or four of each kind of 2d, 4d, 6d, 8d, 10d nails.

Procure a dressed board, that is, one that has been planed smooth, and rest it upon something solid into which the nail can penetrate without doing damage. Dirt is a good foundation, as the point of the nails will not be injured, and they can be used again. Begin at the upper left-hand corner and a quarter of an inch from the top of the board, drive in carefully a twopenny finishing nail a half inch or more, using steady blows of such force as you think is right. An inch below this nail drive in a twopenny common nail. Note the difference in the stroke made and the force required as to whether there was any difference. Continue down with the other sizes, driving first a finishing nail and following it with the same size common nail, noting any difference in the power and the position of the hand and the grip on the hammer handle. In all this exercise let the arm be held as nearly at right angles to the nail as is possible, driving the nails farther into the board as they increase in length.

Pulling Out Nails

It pays to be careful. The spirit of carefulness exercised in details rewards you with nice-looking, finished work. A nail pulled carelessly will leave a mark of the hammer on the wood, and will be useless for further work. Nails are what costs a boy his pocket money. A nail saved is a nail earned.

In pulling out nails few carpenters try to save them—time is worth more than the nail, they will tell you. But a boy has no such excuse, and some day he may be where this spirit of carefulness will be an absolute necessity. If a nail has been properly driven and proper care is exercised in withdrawing it, there is seldom any injury done to the nail, and it comes out of the wood “good as new.” So, then, it is wise to become proficient in the drawing of nails.

Have by you some small pieces of wood, say about six inches in length and three inches broad, of which one is an inch thick and two others a half and a quarter inch. With one or more of these build up a platform beside the nail so that just room will be left for the insertion of the hammer head. Stand the hammer on its head upon this platform and slip the claw under the head of the nail, then pull the hammer handle toward you. Some nails can be drawn easily; others require a smart blow or two on the handle to start the nail upward. Try to administer just the proper force without bending the nail. Draw the nails out and straighten them.

This first lesson may not seem of great importance to you now, but time and again, as you are working on some undertaking, a hint of how to do and what to do will flash through your mind, which you can easily trace to the practice had with your collection of nails, and this spirit of carefulness will color all your work and help to make you successful in what you try to accomplish. It is therefore urged upon you to follow patiently and carefully the instructions, so you can feel capable of saving a nail under almost any circumstances, if it ever becomes necessary. What if, as a missionary, you were to be cast upon a desert island with a stove-in boat and just so many old rusty nails to repair it with? How carefully you would use them, and how thankful you would be that you had learned to drive them to the best advantage!