AdventAI

A SPOOL OF THREAD.

From The Signs of the Times, Vol. 21, No. 5, January 31, 1895

Few people ever stop to think of the twistings and turnings and the various processes that cotton fiber goes through after it is taken from the pod before it is wound up on a spool and ready for the housewife’s needle. The whole story is told, however, in a small space in one of the cases in the hall in the National Museum, given up to an exhibition of textile fabrics. This is one of the many object lessons in the museum, which, combined, are intended to tell the story of man as he exists on earth. First is shown a specimen of cotton in the pod, just as it is picked, without having the seeds removed. Next is shown a specimen of the same cotton after it has been ginned and the black seeds have been removed. The sea-island cotton is used for thread on account of the length of the fiber. A sample of the sacking in which the cotton is baled is also shown.

Then the cotton is supposed to have been baled and shipped to the thread factory. Here the first thing that is done with the cotton is to subject it to the “picker” process, by which the cotton from several bales is mixed to secure uniformity. During the picker process much waste, in the form of dust, dirt, and short fibers, is separated from the good fibers by the picker. Next the “picked” cotton is wound on a machine, inp. 10 sheets or laps, into a roll. The next process illustrated by a practical exhibit is the carding, by which the sheets of cotton are combed, or run out into long parallel fibers. The cotton is next seen drawn through a trumpet-shaped opening, which condenses it into a single strand, or “sliver.” Then eight such slivers are run together into one, six of the strands thus produced are drawn into one, and, again, six of the strands from the last drawing are combined into one.

Then comes the stubbing or fast “roving” process, which consists of winding the strand and bobbin. Two strands are twisted and again wound on a bobbin. After a number of other twistings and windings, during which the strand is gradually reduced in size until it begins to assume a thread-like appearance, two strands of this fine roving are run together and twisted under considerable tension, on a bobbin that makes 7,000 revolutions a minute. Two of the cords thus produced are then wound together on a spool, and then twisted from that to another spool. The two-cord thread thus produced is transferred thence to another spool, and then three threads of two cords each are twisted together, forming six-cord thread.

One who has followed the process sees the cotton gradually transformed from a wide band or sheet of loose cotton to a compact thread that will pass through the eye of a needle. The six-cord thread is at last taken from a bobbin and reeled into a skein, in which form it is bleached or dyed. Then it is wound back from the skein upon a big spool, from which it is supplied to little white birch spools, upon which it is wound in regular courses, and is then ready for the market. The machine that regulates the last winding measures the number of yards wound on each spool. The spools are made of various sizes to hold from 200 to 12,000 yards of thread. The labels that decorate the end of the spools when they are sold are last put on. They are cut and pasted by machinery with great rapidity.—The Star.