THE diamond is the hardest of all substances, as well as the most valuable of all precious gems. The most noted diamond fields are found in South Africa. Sometimes diamonds are imported still enclosed in the soapy, clay matrix, just as they were taken from the mines. The triangular sides of a diamond are called its faces, or facets. In its natural state the gem has but few facets; but one that is perfectly cut has fifty-eight of these pretty three-sided faces. They are made by what is known as “cutting,” which is done in at least two ways. One of these is by rubbing two diamonds against each other over a box, thus catching the dust, which is afterward mixed with olive oil to make a paste used in polishing the stone. Another method of “cutting” is by a “rapidly revolving tin disc, that has no teeth, but is perfectly smooth on its edge. These discs vary in size from the head of a pin up to twenty inches or more in diameter.” When in use, they are placed upon the mandrel of an ordinary foot-lathe, and the surface of the disc is kept running in a bath of oil, in which is mixed a quantity of diamond dust. By this process the hardest of stones are easily cut.
The savings of the diamond dust are not nearly enough to do all the polishing, so large quantities of “bort,” or imperfectly crystallized diamonds, and fragments made by cutting diamonds, are pulverized in a mortar, and used in the same way as the dust. Before they can be polished, the gems are fastened by means of cement into the end of a stick four or five inches long, and then held against a slowly revolving wheel, which has been smeared with a mixture of water and diamond dust. Sometimes the diamond is fastened into a ball made of brass, the top of which is covered with lead. The ball is held over a gas-jet till the lead is softened, and then with pincers the diamond is inserted in the softened lead. When the lead hardens, the ball is placed in a sort of arm, or vise, fastening it in the machine in such a position that the gem is held firmly against a swiftly revolving polishing disc. Every time a facet is polished, the lead has to be melted and the stone turned, and inserted in the same manner as before, till the whole fifty-eight faces have been polished. The length of time required to polish a gem depends on the hardness of the stone. In some cases one hundred facets are polished in a day. Sometimes, however, defects are found in the stone, and then a longer time is required. A case is recorded where four years were consumed in perfecting one gem, and another where the gem was nearly polished away before the flaw was gone. In such a case the lapidary had the more polishing dust, and the owner less diamond.
It has been said that this world is a workshop where the Lord is preparing precious jewels to be gems in the crown of his rejoicing. These gems lie hidden in the deep mines of the sin and pollution of this world, and the Lord has reached down into the depths to raise them out. Now is the time of cutting and polishing, and soon he will have all ready to be taken to the place where they will shine with such brilliancy as no eye in this world has ever seen. We wonder if all who read these lines are being thus polished and refined. Let us not murmur if sometimes we suffer pain of body or mind, through having to be separated from those things which mar the luster of the precious jewel.
MRS. J. A. CORLISS.
Leicester, England.