AdventAI

How to Make a Simple Lantern

By Claude Conard

From The Youth’s Instructor, Vol. LIII, No. 7, February 14, 1905

THE long dark evenings and the late break of day in the winter make some kind of artificial light indispensable. The simple lantern described below is used almost altogether by the people of Ymir, a small mining town in southern British Columbia.

Take a three- or five-pound ko-nut or lard pail. A two-and-one-half-pound tomato or fruit can is not too small. Cut a hole about the middle of one side sufficiently large to admit an ordinary candle. The following is a good way to do this: with a cold-chisel cut two slits, each about an inch and a half long, intersecting at right angles. See Fig. 1. Each one of the angular points thus formed should be pushed inward until an opening is made large enough for the candle. The points will also help to hold the candle in place, and keep it from slipping back when once it has been put in.

Fig. 1.
Fig. 1.

Punch two holes at each end of the opposite side of the can, and into these loop a wire for a handle. Fig. 2. Also put three or four small holes in the bottom of the can on the side nearest the handle, for ventilation. The lantern is now ready for the insertion of the light.

Put a common tallow candle, or a piece of one, into the hole first described. As the candle burns away inside the can, it may be pushed farther in. Figs. 2 and 3.

Fig. 2. Side View - Complete
Fig. 2. Side View - Complete
Fig. 3. Front View - Complete
Fig. 3. Front View - Complete

Of course this little “bug,” as the Ymir people call it, will not stand in a hard wind, but it is amazing how much it will go through without being blown out. On a still night, it will serve every purpose of a kerosene lantern, costs nothing to make, and is much simpler and less expensive in its operation. CLAUDE CONARD.