How Some Common Things Are Made

8%

Review and Herald Publishing Assn. · Washington, D. C. · September 5, 1905

FromThe Youth’s Instructor, Vol. LIII, No. 36

Read the full edition

How Some Common Things Are Made

MANY a boy has tried, at one time or another, to make shot by pouring melted lead from a height into a basin of water. If he failed, as doubtless he did, it was because of faulty methods rather than a mistaken theory. Shot is so made, and has been for more than a hundred years, but special apparatus is necessary.
Previous to 1782 shot was made by cutting sheet lead into strips of a width equal to the desired diameter of the shot. These strips were then cut into squares, and the cubes thus formed were thrown into revolving cylinders, and left there until the friction and attrition had worn the cubes roughly into the form of spheres.
According to tradition, the present method is the realization of a dream. A Mr. Watts of Bristol, England, dreamed one night that he was caught in a shower, the drops of which were round leaden pellets. He knew that all liquid bodies when they fall have a tendency to assume the spherical form, and the more he thought about his dream, the more it seemed possible of realization. He therefore began experimenting.
His first experiment was made by pouring melted lead from the top of St. Mary Redcliffe church into water. It so far succeeded as to warrant further investigation, and the present method of making shot in specially constructed towers is the outcome.
A shot-tower is usually about one hundred and eighty feet high and thirty or forty feet in diameter. The great height is necessary in order to give the falling globules of lead time to cool before they strike the well of water which forms the bottom of the tower. The larger shot, of course, require a longer time to cool, and therefore a higher tower than the small sizes.
The lead is melted in kettles set in brick ovens at the top of the tower. With it is mixed a small quantity of arsenic or of antimony, which have the effect of hardening it and making it cool more quickly.
The center of the top of the tower is occupied by metal colanders, the size of the holes depending upon the size of the shot which it is desired to make. The colanders are moved back and forth automatically by machinery, as a corn-popper is moved over a fire, but with a quick, jerky motion. The melted lead and arsenic flow through a pipe with an automatic cut-off to the surface of the colander. As the layer of molten metal touches it, the colander jerks sharply forward or backward, thereby freeing the metal cleanly and before it can display a tendency to “string out,” The solid portion of the bottom of the colander separates the lead into globules, or drops, which cool as they fall,— and by the time they reach the surface of the water are shot.
The processes of sorting for imperfections and according to size are largely automatic, and are interesting because of the extreme simplicity of the devices which do this apparently difficult work.
By a bucket elevator, that is, an endless chain to which are attached small buckets, the shot are brought from the well to the top of an inclined plane. Down this they roll by the force of gravitation; but the lower end of the plane does not quite reach the receptacle toward which the shot is directed. A space, the size of which has been exactly determined by experience, intervenes. As the shot rolls down this plane, the perfect ones, that is, those which are truly spherical, attain sufficient momentum to leap the space at the bottom and fall into the receptacle. The imperfect shot drop through the open space and are remelted.
Sorting for size is accomplished almost as easily. The mixed shot is poured into the top compartment of a device not unlike a case of drawers, each “layer” or “story” of which is a box with a sieve bottom. These drawers are continually oscillated by machinery, so that the shot fall through one layer after another until they reach one the meshes of which will not allow them to pass. When the “bureau” is emptied, therefore, each drawer will be found to contain shot of uniform size.
The only remaining process is the blackening and polishing. This is accomplished by pouring the shot into revolving cylinders called “tumblers,” which are partially filled with powdered graphite or black lead. The motion and the consequent shifting of the shot upon each other both blacken and polish them.—Edward Williston Frentz.