AdventAI

Simple Tests of Drinking Water

From The Youth’s Instructor, Vol. LIII, No. 38, September 19, 1905

THE presence of organic impurity in water can be detected by dissolving some loaf sugar in it, and then, after putting in a tight stopper, allowing it to stand in a warm, well-lighted room for a few days. If it becomes turbid, there are certainly organic impurities in it; if it remains clear, it is pure and safe to drink. To test the presence of earthy matters, take litmus paper dipped in vinegar, and if, on immersion, the paper returns to its true shade, the water does not contain earthy matter or alkali.

To ascertain if the water contains iron, boil a little nutgall and add to the water. If it turns gray or slate, black iron is present. Or, dissolve a little prussiate of potash, and if iron is present, it will turn blue. The presence of carbonic acid may be ascertained, even in very small quantities, thus: Take equal parts of water and clear lime-water. If combined or free carbonic acid is present, a precipitate is formed, to which, if a few drops of muriatic acid be added, an effervescence begins.

To detect magnesia, boil the water to a twentieth part of its weight, and then drop a few grains of neutral carbonate of ammonia into a glass of it, and a few drops of phosphate of soda. If magnesia is present, it will fall to the bottom. We can ascertain the presence of even a very small quantity of lime if into a glass of water we put two drops of oxalic acid, and blow upon it. If it gets milky, lime is present.

The presence of any acid can be shown by dipping into the water a piece of litmus paper. If it turns red, there must be acid. If it precipitates on adding lime-water, it is carbonic acid. A solution of good soap and alcohol will turn hard water milky; but will not destroy the clearness of soft water.—Search-Light.