AdventAI

Lifting With Magnets

From The Youth's Instructor, Vol. LI, No. 37, September 15, 1903

ONE of the practical uses of a magnet, and to those immediately concerned a highly important use, is that in which it is sometimes employed to withdraw small pieces of iron from such out-of-the-way places as the human eye. Another use of the tractive force of magnetism on a much larger scale is that to which it is put by Edison in his magnetic ore separator, in which the ore, previously crushed to a fine powder, is dropped down a chute past the poles of powerful electromagnets, in passing which the iron particles of the ore are deflected to one side, while the non-magnetic stone dust continues undeflected down the chute. Still another instance of the employment of magnetism in a small way is that in which a magnetized tack hammer is used in the manufacture of strawberry baskets on a large scale, in conjunction with a mechanical device which presents the tacks, one at a time and head up, to the operator, thereby greatly facilitating his work.

It is a far cry from lifting a tack by means of magnetism to the lifting of massive iron and steel plates, weighing four, six, and twelve tons, by this same force, which is now being done every day in a number of large steel works. Electro-magnetism, of course, is utilized, the form of the magnet being usually rectangular for this work and presenting a flat surface to the plates lifted. The magnets are suspended by chains from cranes, and pick up the plates by simple contact, and without the loss of time consequent to the adjustment of chain and hooks in the older method. It is also found that the metal plates can be lifted by the magnets while still so hot that it would be impossible for the men to handle them.—Selected.