DEVELOPING

7%

Review and Herald Publishing Company · Battle Creek, Mich. · Apr 19, 1900

FromThe Youth’s Instructor, Vol. 48, No. 16.

Read the full edition

DEVELOPING

There is no art about developing: it is pure science. Some amateurs look upon it as drudgery, and send their plates to a professional photographer to be developed; one who thus slights a part of the work will never have the success he might attain if he did it all himself.
Before closing the dark-room, everything should be in readiness to begin work. The fixing bath should be prepared, the developer mixed and in the tray, and the washing-box or miscellaneous tray filled with water; it will also be well to have a small vessel of water to use should an emergency arise. Often it is necessary to dilute the developer, or mix a fresh one; and unless you have water in the dark-room, you may have trouble.
After the dark-room has been closed, it is well to wait a few minutes before beginning to develop. When your eyes become accustomed to the dim light, you will be able to see much more clearly than at first. If your plate-holder contains an exposed and an unexposed plate, you must be careful not to get the wrong one. One side of the dark slide is always marked. This side should be turned in when loading the plate-holder; but when it is replaced after an exposure, it should be reversed.
Remove the plate from the holder, and drop it into the developer, film side up. Rock the tray quickly once or twice, to make sure that the developer covers the entire plate, else some spot may remain untouched. Sometimes an air-bell, or bubble, will form on the surface of the film. If this is allowed to remain for even a few seconds, it will leave its mark on the negative; for the part it covers will protect the film from the developer till it breaks. The rest of the plate will have such a start by that time that the protected spot will never “catch up.” But if the tray is rocked vigorously for a few minutes, there will be no danger from this source. The developer, flowing back and forth over the plate, will sweep away any air-bells that may form.
Some photographers rock the tray continuously while the plate is developing. This is advisable if pyro. is used, but it need not be done with any of the developers I have recommended, though it is well to rock the tray occasionally.
If the plate has had a normal exposure, it will soon begin to turn dark in the high lights,—the spots where the image of white or light-colored objects fell. The half-tones and the shadows will quickly follow the high lights; and all the detail of the negative will appear long before the development is complete. No definite rule by which to tell when a plate has been sufficiently developed, can be given. That is something you must use your own judgment about; and judgment, you know, must be acquired by experience.
The negative should frequently be examined by transmitted light; this is done by holding the plate between the eyes and the dark-room lantern. When the high lights are quite black, and the detail is only faintly visible in the shadows, the negative is generally ready for the fixing bath. With some plates the development is complete when a faint image of the high lights can be seen on the back of the plate, when examined by reflected light. After a little experience, you will have no trouble in deciding upon the proper time to stop the development. If you are in doubt, it is best to err on the side of over-development, as that can be readily corrected.
It is impossible to tell how long it will take to develop a plate. That will depend on the brand of plates and the developer used, and on the subject photographed and the time of exposure. With a properly exposed plate and a normal developer, it should take ten or twelve minutes. If the plate has been exposed a longer or shorter time than it should have been, the time required for development will be increased.
To tell whether a plate has been over- or under-timed is often perplexing to the beginner. In an under-timed plate the high lights will appear quickly, and will be quite strong and black before the shadows can be seen at all. When the plate has received the right exposure, the high lights will develop first; but they will be not more than fairly started before the half-tones will begin to be seen. The shadows come next, and all will gain density in correct proportion. An over-timed plate, when placed in the developer, will slowly darken all over, and will show little or no detail until examined by transmitted light. If a plate is known to be over-timed before development begins, it may, unless too far wrong, be almost wholly corrected in development. Even after the plate is in the developer, and the first symptoms of over-exposure are seen, it may be greatly helped. More will be said on this subject at another time.
When the plate is developed, the back — the glass side — will have a dirty white appearance. The plate should be immersed in the fixing bath until all this white disappears. It is well to leave it a few minutes longer to insure thorough fixing. There is no danger of leaving it too long; and once the plate reaches the fixing bath, it is beyond danger of injury from light; so the dark-room may be fearlessly opened. After the plate is fixed, the chemicals must be washed out of the film by soaking it in water for three quarters of an hour. If you use a shallow tray, the water should be changed once or twice; but if you have a washing-box, this will be unnecessary. When thoroughly washed, the surface of the film should be carefully wiped with a roll of wet absorbent cotton to remove any particles of foreign matter that may adhere to it. The negative may then be placed in the rack to dry. Do not attempt to dry it in the sun or near a fire, as the film melts at a low temperature while wet.
Developing is to me the most interesting part of the photographic process. There is another kind of developing, in another science; and as I compare the two, I am surprised at their many points of similarity.
We carefully mix the chemicals that make our developer, pour them on the plate, and watch the result. If we have made no mistake, there comes forth a picture that delights, not only ourselves, but every one who sees it. God never makes a mistake. He never exposes us to temptation too long. His blessings always contain the right proportion of joy and sorrow, of hope and fear, of temptation and triumph; for he knows the needs of every soul.
When we have spared no pains to make our negative a success, and through some accident it turns out a failure, we are disappointed and sad. So when we receive God's blessings in vain, and under them develop an evil character, the hosts of heaven turn away in sadness, and the Saviour mourns, not for his wasted blessings, but for the sorrow that each disobedient child is bringing upon himself.
J. EDGAR ROSS.