VELOX AND OTHER DEVELOPING PAPERS
By J. Edgar Ross
When Velox paper was first introduced, it created quite a sensation in the photographic world. It bounded to universal favor at once, but was soon rejected by the majority of professional photographers as unsuited to their needs. With amateurs, however, it still retains a well-deserved popularity. Many different brands of similar paper are now on the market. I have used none of them myself, but have been assured by those who have that there is no more difference between them than between different brands of gelatin paper. I will therefore describe the method of working Velox, and you can apply the instruction to any other similar brand. Velox is a bromide-developing paper, but it is not nearly so sensitive as “standard” bromide. A dark-room is not needed, but of course the paper will not bear exposure to too strong a light. If handled expeditiously, prints may be changed and developed by the light of an ordinary lamp, provided it is placed on the opposite side of the room in which one is working. By drawing down the curtains, the paper may usually be handled with safety during the day. The exposure may be either by daylight or by artificial light; but the intensity of daylight varies so greatly that one is likely to waste two or three prints in testing its strength every time he begins to print. For that reason it is better to print by artificial light. Both printing and developing may be done in the sitting-room during the evening, without disturbing other members of the family in their use of the light. Held one foot from a number two kerosene burner, a negative of ordinary density will print in two or three minutes. Though Velox prints very slowly, compared with the ordinary bromide paper, it more than makes up the time by the rapidity with which it can be developed. The image will flash up almost as soon as the paper touches the developer, which must be strong. Our standard developer, used full strength (without the addition of water), is a developer par excellence for Velox paper, but it will require a restrainer to keep the light portions of the picture clean. One drop of a ten-per-cent solution of bromide of potassium, or of a fifteen-per-cent solution of chloride of sodium (common salt), to each ounce of developer, will be about what is required under ordinary circumstances. As development is so rapid, it will be necessary to exercise great care in immersing the print. If one part of the paper remains out of the developer half a second after another part touches it, the picture will be irreparably ruined. The best way is to take one corner of the print between the thumb and forefinger, lay it face downward in the developer, and move it quickly back and forth two or three times. Turn the print over, and push the corner that you still hold under the developer; then lift it quickly, so that some of the developer will flow over the face of the entire print. This will wash away any air-bells that may have formed. The print may then be turned face downward again, and moved quickly back and forth for two or three seconds. If the exposure has been sufficient, the image will be so nearly developed by that time that the print may be lifted entirely out of the developer. Enough developer will remain on the film to complete the development. The moment the print reaches the desired density, it must be immersed in the fixing-bath. A plain hypo-bath will do, but the addition of a little alum will harden the film, and lessen its liability to injury while washing. Hypo, 2 ounces
Powdered alum, ½ ounce
Water, 8 ounces This bath keeps well; and if desired, it may be used over and over again. Fix fifteen minutes, and then wash one hour in running water. Stained whites may be caused by over-exposure, by forced development of an under-exposure, by fogged paper, or by an insufficient amount of restrainer in the developer. Too much restrainer or too weak a developer will give shadows of a greenish or brownish tint. Over-exposure is another cause of this trouble. Gray shadows and weak high-lights are caused by under-exposure. Prints that have been over-developed may be reduced, as with other bromide paper, with a hypo.-ferricyanide bath. Sometimes a print will be covered with hairlines, that look just like pencil-marks. Various causes have been assigned for this; but the true cause has probably not yet been discovered. The marks may be removed from the print after it is dry, by rubbing them with a tuft of cotton, moistened with alcohol. A few seconds in a weak reducing-bath will also remove them. The Vinco paper, similar to Velox in other respects, develops much more slowly. The manufacturer of this paper is not a member of the paper trust, so Vinco is sold much cheaper than most papers of this class.