HOW THIMBLES ARE MADE

33%

Review and Herald Publishing Company · Battle Creek, Mich. · Jun 1, 1899

FromThe Youth’s Instructor, Vol. 47, No. 22.

Read the full edition

HOW THIMBLES ARE MADE.

The thimble is a Dutch invention, and the first one was made in 1684 by a goldsmith named Nicholas Van Benschoten. Originally it was called a “thum-bell,” because it was worn on the thumb. In making thimbles the gold and silver ingots are rolled out into sheets of the desired thickness, and cut by a stamp into circular pieces of the required size. These circular pieces are bent into thimble shape by means of a solid metal bar that is of the same size as the inside of the intended thimble. This bar is moved by machinery up and down in a bottomless mold; and each time it descends, it presses one of the circular pieces into thimble shape.
When the thimble is shaped, the next work is to brighten, polish, and decorate it. First the blank thimble is fitted with a rapidly revolving rod. A slight touch of a sharp chisel cuts a thin shaving from the end of the thimble, a second chisel does the same on the side, and a third neatly rounds off the rim. A round steel rod, well oiled, is held against the surface of the revolving thimble, to polish it bright. The inside is brightened and polished in a similar manner, the thimble being held in a revolving mold. Then a delicate revolving steel wheel, with a raised ornamental edge, is pressed against the blank thimble, and prints the ornament seen just outside the rim. Another steel wheel, covered with sharp points, makes tiny indentations all over the remaining blank surface of the thimble. The last operation is to wash it thoroughly in soapy water, and brush it carefully.—Children's Visitor.