MAKING WALL-PAPER

20%

Review and Herald Publishing Company · Battle Creek, Mich. · Nov 15, 1900

FromThe Youth’s Instructor, Vol. 48, No. 45.

Read the full edition

MAKING WALL-PAPER

THE manufacture of wall-paper is extremely interesting. First a web of blank paper is set in a reel behind a blotching-machine; two cylinders bring the free end of the paper into the machine, where a roller working in a color-pan puts a large quantity of color upon the paper in blotches. Then a set of flat brushes, called “jiggers,” brush quickly back and forth, thus spreading the coloring-matter evenly over the surface of the paper. As the paper comes from the blotching-machine, a workman takes one end of it, wraps it around a stick, and places the stick across two parallel endless chains, and the paper is thus carried up an incline. When eighteen feet of it has run out, the chains take up another stick that lies across them, and carry it up as they did the first. A third stick soon follows the second; and thus the work continues until the entire web has been run out of the blotching-machine.
The chains, in their working, hang the paper in loops over a system of steam-pipes; and it is thus thoroughly dried before it reaches the end of the chain, where it is again wound into a web. Wall-paper designs are first sketched on paper, and then transferred to rollers of the size required. It is necessary to prepare as many rollers as there are colors in the design; thus, if the design requires printing in eight colors, eight rollers must be prepared. When all the rollers are ready, the artist directs the rollers, and each one is given a color. A workman, to whom a certain color has been given, takes a roller to his bench, sets it firmly in the grasp of a vise, and with hammers, files, brass ribbons, and brass rods, goes to work. Every bit of the design that is to be in green is traced out for him, and he carefully reproduces it in relief on the roller.
When his work is finished, the roller bears on its face, in raised brass, the stems, leaves, etc., and at the proper time and place will put the green coloring and shading just where the designer intended it to be. In like manner the other rollers are made ready for use. They are then taken to a press that has a large cylinder of the width of ordinary wall-paper. There are grooves around the sides and bottom of this cylinder, into which are fitted the rods on the ends of the rollers, and when in position, the faces of the rollers just touch the cylinder. An endless cloth band comes to each of the rollers from below. Each of these bands works in a color-pan, which contains, in liquid form, the coloring-matter to be carried on the roller to which the band belongs. Each roller is placed in such a position that the part of the design upon it will strike exactly in the spot necessitated by the relative position of the other rollers. When all is ready, the paper that has passed through the blotching-machine is placed between the cylinder and the first roller, the cylinder and rollers revolve rapidly, and soon the paper is beautifully printed.
A wall-paper press throws off ten rolls of paper a minute, and each roll contains sixteen yards. It is said that stamped paper for walls was first manufactured in Holland, about the year 1555. Some of the very costly wall-paper in use nowadays is beautifully embossed and painted by hand.—Selected.