Aluminum Consumption and Price Growth in America
The consumption of aluminum in the United States in 1914 was the largest on record, and amounted to 79,129,000 pounds, valued at $14,523,000. Sixty years ago aluminum was a chemical curiosity, valued at $90 a pound. The total amount produced in 1883 was 83 pounds. About 1889 it was selling in the United States at $4.50 a pound, and the output was 75 pounds a day. With cheapened electric power and improvements in manufacturing processes, due to the genius of men like Charles M. Hall, the metal has ceased to be a “chemical,” and its uses and applications are growing. At the end of 1914 it was selling at 19 cents a pound, but now, owing to the great demand, it is worth 35 to 37 cents a pound. The consumption of metallic aluminum in the United States is much greater than the output, and, though some metal is exported, a much larger quantity is imported. Much secondary aluminum is recovered from one source or another, largely from scraps, borings, and turnings. This recovered aluminum amounted, in 1914, to 6,253 short tons, or 12,506,000 pounds. The consumption of the metal is growing rapidly, and the facilities for turning out enough for home consumption are inadequate. The one concern manufacturing the metal in the United States has steadily expanded its plant capacity in recent years, and has recently acquired an immense plant capable of generating 100,000 horsepower, at Whitney, North Carolina, financed by French capital, but on which work has been suspended. The great increase in the consumption of metallic aluminum has been determined by the peculiar properties of the metal, especially its lightness. Commercial aluminum has a specific gravity of about 2.7, whereas the specific gravity of brass is about 3 times as great, that of steel about 2.8 times as great, and that of copper approximately 3.3 times as great. Hence the metal has been in demand in the manufacture of automobiles, aeroplanes, and dirigible balloons. Aluminum vessels are coming into use in the brewing industry, varnish manufacture, the preparation of foodstuffs, the soap and candle industry, the refining of sugar and of fatty and vegetable acids, and in the manufacture of high explosives, because of its ability to withstand the action, either separately or combined, of sulphuric and nitric acid. Aluminum can be said to have no substitute, but is growing in importance as a substitute for copper for conducting electricity, and also as a substitute for tin in certain applications. When one considers the multiplicity of uses to which aluminum is now applied, and the part that it is destined to play, the question of the domestic supply of bauxite, the mineral from which the metal aluminum is now made, assumes importance. In 1914, the domestic production of bauxite (bō'zit), the mineral from which all our metallic aluminum is now obtained, was over 219,000 long tons, valued at slightly over $1,000,000, the largest on record. The imports were nearly 25,000 long tons. Our total consumption of the ore, therefore, was 244,000 long tons, of which the imports were slightly more than 10 per cent. These imports come from France, which is the most important producer. The United States ranks second, and of late years has rapidly gained on France. Productive bauxite areas are confined exclusively to the Southern States — Arkansas, Tennessee, Georgia, and Alabama. The State of Arkansas has for many years produced more than eighty per cent of the bauxite mined in this country. The remainder comes from northwest and central Georgia, northeast Alabama, northeast and southeast Tennessee. It is reasonably certain that as time goes on, more of this important mineral will be found in east Tennessee, as well as in north and central Georgia. Bauxite has other uses than as the ore of aluminum: (1) As the base of salts, of which the alums, including aluminum sulphate, are the most important, aluminum sulphate, commonly referred to as “commercial alum,” being used widely in the purification and clarification of municipal water supplies; (2) in the manufacture of alumina, or bauxite brick; (3) in the manufacture of artificial abrasives, one being alundum, which may be termed artificial corundum. There are at present no substitutes for bauxite for use in making aluminum, although the preparation of potash sulphates from alunite deposits in Utah may result in the production of important quantities of alumina in such pure form that it will be available without further treatment. Another prospective source of alumina is ordinary clay, but although experiments have been in progress some years, no process for obtaining alumina from clay has yet reached the commercial state. As common clay contains 10 to 39 per cent alumina, the development of a commercial process warrants all the attention that can be given it. So far as our present resources are concerned, we may consider the United States as practically independent, especially as new bauxite occurrences may be found, and American inventive genius may be trusted to solve the problem of extracting the metal from clay or some other alumina compound. The plant required for manufacture of metallic aluminum is extensive and costly, so that at present this country is dependent on foreign sources for a part of its supply of metal. The new plant in North Carolina will help matters somewhat, but aluminum plants cannot be built in a day, and they require large electric power installations.