Aluminum — the Baby Metal

6%

Review and Herald Publishing Assn. · Takoma Park Station, Washington, D. C. · Aug 8, 1916

FromThe Youth’s Instructor, Vol. 64, No. 32.

Read the full edition

Aluminum — the Baby Metal

CERTAIN metals, such as iron, gold, silver, brass, and tin, have been known to man practically as long as man himself has existed. But aluminum has not been known to the world for even a century, and yet it is more abundant, indeed, than iron, for it constitutes about eight per cent of the earth’s crust. It is the basic metal of all clays and enters into the composition of nearly all rocks. “Ruby-jeweled,” we say of a watch if we wish to affirm that the watch is a good one; yet we might almost as well say “aluminum-jeweled,” for the ruby and the sapphire are practically nothing more than aluminum and oxygen.
Notwithstanding the widespread distribution of aluminum mentioned above, there are but three minerals which deserve to be classed as ores of aluminum—bauxite, cryolite, and corundum. Of these, bauxite ranks first in importance, because it can be refined more readily than either of the others. It is found principally in the southern parts of France, in Georgia, Tennessee, and Arkansas. In composition it is a hydrated oxide of aluminum, having as impurities, silica, oxide of iron, and titanic acid.
Though aluminum is very abundant, no one suspected its presence until about one hundred years ago. The first suggestion that clay and many rocks of similar formation depend upon some metal as their base, was advanced in 1808 by Sir Humphrey Davy, and proved to be correct in 1828 by Prof. Friedrich Wöhler, of Germany. Professor Wöhler first isolated aluminum by decomposing aluminum chloride by potassium, and obtained it in the form of a powder. Later, in 1845, he obtained small malleable globules. Wöhler’s process was improved upon by a French chemist, Deville, and the first almost pure metal was placed upon the market at ninety dollars a pound. By repeated experiments the Deville process was improved and amplified and new processes developed, until in 1886 the price of aluminum had dropped to about nine dollars a pound.
As to the modern processes of refining and manufacture, I shall quote largely from a book published by a concern interested in the distribution of aluminum products. Having reviewed the history of the metal up to 1886, the book says:—
“Then came a revolution in the art of producing the metal. So far, all the processes were chemical and decidedly expensive. It was about this time that the wonderful development of the dynamo had for the first time in the history of the world made electricity actually cheap. Experimenters then turned to electrolysis, rather than to chemical action and reaction, to free the aluminum from its bonds.
“In 1886 Charles M. Wall, of Oberlin, Ohio, discovered a process of reducing aluminum from alumina by electrical means which combine the principles of the electric furnace and the electrolytic bath. This process put aluminum on a commercial basis for the first time.
“The steps in the process employed to bring aluminum from the ore bed to the market are about as follows: Bauxite from Arkansas is taken for refining to East St. Louis, where a peculiarity in the metallurgy of aluminum determines the first step. With the ores of most other metals it is necessary simply to concentrate and separate the true ore from the gangue by mechanical means which take advantage of the different densities of the two parts. The ores are then smelted and the impurities worked out by various methods of refining. In the case of aluminum the ore must be carefully refined before smelting. In refining the bauxite, advantage is taken of the fact that alumina (oxide of aluminum) forms with soda a compound called sodium aluminate, which is soluble in water. The impurities, iron oxide and titanic acid, are insoluble and silica is nearly so. The sodium aluminate is formed either by roasting the bauxite with carbonate of soda (known as soda ash) or by digesting with caustic soda in a vessel under pressure. In either case sodium aluminate is formed, and is separated from the impurities by filtration and by washing the residue with hop water.
“The sodium aluminate solution is decomposed by two methods, the alumina being thrown out of solution as a hydrate. In the Bayer process the solution is decomposed by agitating in the presence of some fresh precipitated hydrate. The spirit liquor is drawn off, and is used to take up a fresh quantity of alumina. Another method of decomposition employs the injection of carbonic acid, which forms carbonate of soda and aluminum hydrate. The hydrate is then carefully washed to free it from soda salts.
“When apparently dry, the aluminum hydrate contains thirty-four per cent water chemically combined, which must be removed before the ore is ready for reduction. At East St. Louis, Illinois, the hydrate is, therefore, placed in furnaces where it is subjected for forty-eight hours to heat gradually increased to two thousand degrees Fahrenheit. The removal of the water from the hydrate leaves it alumina as it comes from the furnaces. This alumina looks like a white powder. It is placed in bags and is taken to Niagara Falls, New York, Massena, New York, or Shawenegan Falls, Quebec, where it is subjected to the Hall process of reduction. This process employs a double fluoride bath.” In other words, cryolite is melted by the action of an electric current, and in this condition takes the ore into solution in somewhat the same manner that water dissolves sugar. The reduced metal collects at the bottom of the reduction pot and is tapped off and cast into ingots, or pig aluminum. After the “pig” is melted and recast, aluminum is ready for the market.
The weight of aluminum is about one third that of iron or tin, about three tenths that of copper, one fourth that of silver, and but little more than one eighth that of gold.
In point of malleability, gold alone precedes aluminum, and aluminum can be hammered into leaf nearly as thin as gold leaf.
Aluminum ranks three times as high as iron with respect to heat conductivity. It stands first in specific heat, and will store up more heat and retain it longer than will any other metal.
In the commercial market aluminum has been an exception to the laws of economies—the supply has created the demand. Its uses are already manifold. Steel companies use it in casting steel, because of its deoxidizing powers, to attract or absorb gases from the molten metal. An ounce of aluminum will free from gases a ton of steel. An enormous quantity of aluminum is now used in the manufacture of automobiles. Electric and traction companies use it extensively in form of wires, cables, cars, and fixtures in coaches of trains. Soap manufacturers, manufacturers of paraffine and cooking oils, and breweries, use great pans and pipes of aluminum. Kodaks and typewriters nowadays have many aluminum parts.
Most of the armies of Europe now use aluminum utensils. The German soldier carries no metal other than aluminum, except in his weapons. He marches on shoes pegged with aluminum, buttons his coat with aluminum buttons, and drinks from an aluminum flask.
Aluminum is found in thousands of homes, sanitariums, and hospitals, in the form of cooking utensils, and bids fair to displace all other materials for nearly every purpose in the kitchen. Its lightness, heat conductivity, beauty, and sanitary qualities make it especially adapted to such use.
So, although aluminum is practically the youngest of metals, it is already displacing the older ones in many places, and may one day be the commonest of them. R. M. COSSENTINE.