AdventAI

The Story of Paper, Briefly Told

From The Youth’s Instructor, Vol. 67, No. 14., April 8, 1919

So far as is known the ancient Egyptians were the first to use paper for writing purposes, preparing it from the papyrus plant. They called it papyrus; and from this the name “paper” has been derived. This plant, which grows in wet, marshy soil,—mainly now near Jaffa, Syracuse, and Lake Thrasymenus, to the north of Egypt,—has stems eight or ten feet long, resembling the ordinary rush in outward appearance. The lower end of the stem, the portion under the mud and water, is whiter and more compact than the portion above. The thin layers of tissue under the outer skin of these underwater parts were used for the manufacture of the writing material.

These thin layers were carefully separated and laid side by side with their edges overlapping. Crosswise on them with edges likewise overlapping, other layers were placed until a sheet of the desired thickness was obtained. After subjecting it to pressure for a time the sheet was dried in the sun. It was then ready for use. When new, it was white or brownish white in color, but gradually became darker with age.

Rolls of papyrus, some dating back to 2000 B. C., have been found in Egypt, in most cases having been interred with the dead. Their preservation for this remarkable length of time is due to the careful way in which they were put away and to the dry climate of the country. These ancient papyri have become light or dark brown in color and are extremely brittle, so that a mere touch is sufficient to break them.

Raw Materials Used

In Asiatic countries, notably China and India, the leaves of various plants and the bark of certain trees were used in very early times for writing purposes, the characters being impressed on them with a sharp-pointed instrument. Such materials are used to some extent to this day by certain of the primitive peoples.

Some writers believe that the use of these materials suggested a method of manufacturing paper from vegetable fibers, a method that gradually developed into the paper-making art of the present day. Others have suggested that by watching the work of paper-making wasps man first learned the secret of recombining finely divided vegetable fibers into thin sheets.

The Chinese knew the fundamental principles of paper making as early as the beginning of the Christian era—perhaps much before that time, so far as any one knows. They probably utilized cotton fibers, the soft parts of bamboo stems, and the barks of trees. The Arabians learned the art from the Chinese some seven hundred years later, and from the Arabians the secret was passed along to the Moors in Spain where cotton and probably hemp and flax were used for paper making.

For a time in the sixteenth century cotton and linen rags were the principal raw materials for the manufacture of paper, as they were found to yield an exceptionally fine product. They are still used to a considerable extent for the best grades of paper.

Several hundred kinds of paper materials are now known. Among these are grasses of various kinds, wood, straw, bark, and various vegetable substances. The bulk of all paper manufactured particularly for printing and wrapping, is made from wood pulp. Large quantities of waste paper of various kinds are worked over into new stock.

The Way Paper is Made

The process of manufacture differs considerably, according to the kind of materials being used and the purpose for which the finished product is to be used. After being freed from all dust and dirt, the raw materials are reduced to a pulp by grinding, mixing with water, and treating with chemicals. After a slightly mucilaginous composition and coloring matter have been added, the pulp is thoroughly mixed and agitated. This work, like all the succeeding steps in the process of manufacture, is usually done by ingeniously constructed machines.

When the pulp has been reduced to an almost impalpable fineness, it is strained and conducted in the chests of the machine from which it issues through an orifice onto a fine screen, usually made of wire, over which it is spread in a thin film. Special provision is made for rapidly absorbing the moisture in the pulp at this point.

When the film is sufficiently dry, it passes through a series of rollers, being made thinner and thinner as it goes along until it is reduced to the thickness desired. The last rolls through which it passes are heated so that a large part of the remaining moisture is removed and the paper is given a smooth, glossy finish. The paper comes from the machine in a continuous sheet and is wound on rolls; single rolls containing fourteen miles and more have been made.

For some purposes the paper is cut up into sheets of whatever size may be required, but for big modern printing presses it is carefully wrapped and shipped in the roll, being fed into the press in a continuous web, just as it came from the paper-making machine.

It is not known just when the idea of watermarking paper—impressing on it a device by means of an impression on the fine web of wires or threads or on the rolls between which it passes in the machine—was conceived, but watermarked paper was used for a manuscript known to have been written as early as the thirteenth century.

The first paper manufactory in America was established by William Rittinghuysen in 1690, on land which lies within the present limits of Philadelphia. Wood pulp and wood fibers for paper making were first introduced by an American manufacturer more than sixty years ago.—The Pathfinder.