Black and White Figures (Concluded)
By J. Edgar Ross
THE articles already described are the ones most practical to make, and a great variety of patterns may be secured by varying them to suit the taste or requirements. They are not the only ones that can be made, but in the others there are no new principles involved, so it will not be necessary to describe them in detail. Alternate black and white rings that extend entirely around the base are very pretty on small work. The edges of the rings, however, must be serrated. To make them smooth it would be necessary to change all the threads on one circle; and if this is done, the two circles of warp will be crowded apart, and there will be a crease between the black and the white. If you will refer again to Fig. 20 in last week’s paper, you will see on the end of the piece where the work was begun, a white ring, with the inner edge serrated, while at the other end is a black ring with serrated inner edge. It will not be necessary to make the notches as deep as here shown, however. If each alternate thread is changed, the remaining ones will be sufficient to bind the circles of warp together. In this way the change from black to white, or vice versa, will be made in working twice around the base. Short, pointed stripes of one color, inserted in a ground of another, is a pretty pattern, and not difficult to make. If the stripes are spiral, it will be well to use both the regular and the forward stitch, so that each alternate circle of stripes may curve in the opposite direction. Squares that contain but two or three threads each, can be made without serrating the edges. But there is a great deal of work about making squares in this manner, and the end will not justify the means. By serrating the edges, however, the making of squares presents no great difficulty. Some of the figures described I have never seen except in my own work. They are all that I have ever tried to make; but I feel sure that if one masters them, he will know enough about weaving horsehair to be able to trace any simple design that he cares to undertake. The weaving of one’s initials or monogram would be a task of no great difficulty. The best way to do this would be to mark the design on the base before beginning to weave. This would serve as a guide, and the worker would then know just where to change the threads from white to black or from black to white. You may not be able to follow every line exactly, for there is no middle ground between threads of woof. Each must occupy its allotted place; but unless both warp and woof are unusually large, it will not be necessary to go far from the mark. The most beautiful piece of woven hair work I ever saw was a riding-whip, and next week I will tell you how to make one. If you are fortunate enough to secure hair of such a bright variegated sorrel color as that used in weaving the whip to which I refer, there is no reason why you should not make one every whit as good. If you do not have such hair, you can substitute what you do have. In the articles to be described hereafter, I will deal with them as if woven of one solid color, and leave my readers to follow whatever design they choose.