AdventAI

How Pins Are Made

By Mrs. J. A. Corliss

From The Youth’s Instructor, Vol. L, No. 43, October 30, 1902

The familiar expression, “Oh, it is not worth a pin,” gives an idea of the small value commonly attached to this useful little article. Yet it is of so much actual worth that much study has been put upon it by men of inventive genius to make machinery for its improvement and manufacture, and even the time and talent of grave legislators have been given to it.

The almost universal use of pins, in some form, may be traced to the most remote antiquity. The earliest shape was probably that of the natural thorn, the same as is now used by the people of upper Egypt in fastening their clothing.

Later, bone and wood were made to serve the same purpose, by being whittled into the form of a meat-skewer. Very early, however, bronze pins without heads were in use by civilized nations. But as late as the sixteenth century, the ordinary domestic pin was of so crude a nature that the English Parliament passed a law requiring those imported for English use to be “double-headed, and have the heads soldered fast to the shank,” and the “shank to be well shapen, the points to be well and round filed, canted, and sharpened.” From this we learn that the pins of that day were not so fine as those now in common use. It appears that they consisted of a shank with a separate head of fine wire twisted round and secured to it. All this required much work, and made pins so expensive that they were purchased for Christmas and New-year’s gifts. But sometimes the stock ran low at the stores, and they were not obtainable. Then a sum of money with which to buy them, when they could be purchased, was presented instead, and was known as “pin-money.”

This finally grew into the custom of requiring a young man to settle upon the lady he intended to marry the yearly amount of pin-money she was to be allowed after marriage. Many allusions to this strange custom are still to be seen in old English documents. This custom, however, created a difficulty; for the pin-makers took advantage of the popular demand to raise the price of pins, when the ladies made loud complaints that the pin-money did not go as far as it ought in purchasing pins. Therefore, in 1543, Parliament interfered, and made a law that pins should not be sold for more than six shillings and eight pence for a thousand. At the present value of money, that would be about one dollar and sixty cents; but at that day it was nearly twice this amount.

For some reason, however, the price of pins was again raised, and we read of Abigail Adams’ stating, in “Familiar Letters,” June 15, 1715: “The cry for pins is so great that what I used to buy for seven shillings and sixpence are now twenty shillings, and not to be had for that.”

When we think of the slow process by which pins were made at that time, the high price is not so great a wonder. Then, one man drew out the wire by hand, another straightened it, a third cut it, a fourth pointed it, and a fifth ground it at the top for receiving the head, which was made by one man, and put on and soldered by a second, while a third whitened the pins, and a fourth stuck them into papers.

All this work, except the whitening, is now done almost as quickly as one can wink his eye. The ingenuity of man has brought into use machinery by which brass wire of suitable size is passed from a reel into a little steel aperture, where it is seized and straightened, as it moves along to be cut into proper lengths. It is here caught between jaws, with enough of the end protruding to form the head. Against this, a steel concave punch is driven with sufficient force to shape the head. The pin then passes on, and drops, point first, into a small slit, where it hangs with many others by the head. Here a revolving steel roller with file-like teeth works against the points, rounding, pointing, and polishing them very neatly. As each point is finished, the pin is pushed on out of the way, and falls into a vessel standing under the machine.

But it is not yet as “bright as a new pin;” the silvery look that new pins have is lacking. So the “cleaning,” or “coloring,” process must be performed. The pins are first boiled in weak beer, which removes all the grease and dirt. They are then arranged in layers in a copper pan, alternating with layers of grained tin. The whole is covered with water, sprinkled with bitartrate of potash (cream of tartar), and boiled for several hours.

By this process the brass pins become coated with a thin deposit of tin, which gives them their bright appearance. They are then washed in clear water, and put in a barrel containing dry bran or fine sawdust, and the barrel is revolved until the pins are completely dry. After winnowing, the pins are finished, and ready for the papers in which they are sold. The pins are now dropped into a hopper, which passes them to a steel plate with as many slits in it as there are to be pins in a row. The pins drop through the slits, and hang by the heads, the same as when they were to be pointed. The machine then presents the folded and crimped paper in which the pins take their places in straight rows.

This seems like a long process for the production of so small a body as a pin. But the work is all done much more quickly than it can be told. There are mills in different parts of the world, some making ten millions of pins a day, others seventeen millions, and from that up to twenty, and even thirty millions of pins daily. It will be readily seen that except much study had been given to the invention of pin machinery, these useful little articles would have cost a great deal, and would not have been as common as they now are, nor would a common comfort have been brought within the reach of the poorest of people. This is but another illustration of the proverb, “There is no excellence without labor,” and it applies in small things as well as in greater. MRS. J. A. CORLISS.