Nickel-Steel Alloy and New Sugar Plants
By Carolyn Hathaway
The article “Rain and Its Lesson” in the last number of the Instructor should have been credited to Minnie A. Peterson. Nickel-Steel in Manufactures.—On account of the natural law that “heat expands and cold contracts,” it is necessary in the manufacture of clocks, as well as in other fine arts, to employ metals which will respond the least to changes in temperature. For this purpose an alloy of steel with thirty-six per cent of nickel has been used with remarkable success. It is largely used in the manufacture of pendulum rods for expensive clocks. The brass bob is contrived so as to make up for the slight variation in the rod caused by changes in temperature. Nickel-steel is also useful for the reason that it will not easily rust. Its scarcity prevents its use in large quantities. New Sugar Plants.—At the present time the Department of Agriculture is much interested in a search in foreign nooks and corners of the world for plants that may be used in the manufacture of sugar. Two have recently been discovered. One is found in Central America, and the technical name given it is Lippia Mexicana. It is a creeping plant, and the leaves, when chewed, give out a sweetness stronger even than sugar. Aside from its medicinal use in the tropics, it has not been cultivated. The other is a tiny plant, perhaps six inches high, and produces delicate leaves and blossoms. It is found in the plateaus of Paraguay. Its saccharine properties are so great that only a few of the leaves are necessary to sweeten a large cupful of any beverage, the flavor remaining in the mouth many minutes. This latter plant is called by the Paraguayans “sugar herb,” or “honey herb.” The peculiar property that gives it its sweetness is not due to sugar, but to some unknown chemical substance, which will not ferment by the addition of yeast. Perfected Dentistry.—The achievements of modern dentistry in preserving and beautifying the teeth are becoming a matter of much comment. Instead of having the cavity of a decayed tooth filled with gold, so as to be conspicuous, a new method has recently been introduced in this country of using a substance so entirely like the natural tooth in appearance as to be quite imperceptible. To do this successfully is a very delicate undertaking. First the dentist obtains a mold of the cavity with very thin platinum foil. The mold is removed from the mouth, and several porcelain teeth of different shades are placed beside the tooth to be filled, until one is found exactly matching the color of the natural teeth. The porcelain teeth are numbered to correspond with a series of mixtures. The dentist then selects a mixture corresponding with the shade of the tooth he wishes to fill. This is mixed with water, and placed in the platinum mold. It is next heated to a white heat in an electric furnace, an important part of the process being to know just how long to continue the heating. When the proper point has been reached, it is withdrawn from the mold. A little cement is placed upon the cavity, and the porcelain inserted. If the work is properly done, this will exactly fit the cavity. The porcelain is allowed about five minutes to set. Twenty-four hours later the patient returns to have the tooth smoothed and polished. It is said that a filling of this kind becomes a part of the tooth itself. The process is quite new in this country, and has never been introduced into the countries of the Old World.